---
title: "Deep Groove Ball Bearings: Types, Design &amp; Applications"
date: 2026-11-09
description: "Among all rolling bearing types, deep groove ball bearings are the most widely used. Their simple structure, low friction, high speed capability and low mainten..."
source: https://en.mshjzc.com/bearing-basics/58127.html
---

# Deep Groove Ball Bearings: Types, Design &amp; Applications

Among all rolling bearing types, [deep groove ball bearings](/deep-groove-ball-bearings.html) are the most widely used. Their simple structure, low friction, high speed capability and low maintenance requirements make them the default choice for motors, gearboxes, automotive systems and household appliances. This article explains the design variations, seal options and load characteristics engineers need to evaluate before specifying one.

If you are new to rolling bearings in general, start with our overview of [rolling bearing components and working principle](/bearing-basics/58122.html).

## Basic Design of Deep Groove Ball Bearings

A deep groove ball bearing consists of an inner ring, an outer ring, a set of steel balls, and a pressed steel or nylon cage. The raceways on both rings are arched grooves slightly larger than the ball diameter, providing a smooth circular track for the rolling elements.

The deep groove geometry allows the bearing to carry radial loads in both directions, plus a certain amount of axial load from either side. This combined load capability is the main reason deep groove ball bearings appear in so many different machines.

The contact angle is close to zero under pure radial load. When axial load is applied, an effective contact angle develops, and the bearing can support axial force as long as the radial component remains present.

## Common Design Variants

### Open Type (No Seals or Shields)

The open version has no seals on either side. It is used when the machine itself provides external lubrication and sealing, or when the bearing is mounted inside a sealed housing with its own oil bath or grease supply. Open bearings offer the highest speed limit because there is no seal lip friction.

### Shielded Type (Z or ZZ)

One or both sides fitted with a pressed steel shield that does not contact the inner ring. The shield keeps dust and solid contaminants out while retaining grease inside. Shielded bearings are pre-lubricated at the factory and require no relubrication for most applications. Double-shielded is marked 2Z or ZZ.

### Sealed Type (RS or 2RS)

Rubber contact seals (nitrile or FKM) touch the inner ring land, providing much better protection against moisture, dust and liquid splash than shields. The trade-off is slightly higher friction and a lower speed limit. Double contact seals are marked 2RS, 2RSH or 2RSR depending on the manufacturer.

### Snap Ring Type (NR or N)

A groove on the outer ring with a circlip allows axial location in thin housings without a separate end cover. This reduces housing size and simplifies assembly in gearboxes and conveyor pulleys.

## Bearing Series and Dimension Codes

Deep groove ball bearings follow a standardized numbering system. The basic number tells you the dimensions and load class:

- **6000 series** - light section, thin cross-section, lower load capacity, highest speed
- **6200 series** - medium section, the most common general-purpose series
- **6300 series** - heavy section, higher load capacity at lower speed
- **6700 / 6800 / 6900 series** - extra thin cross-section for compact installations
- **16000 series** - extra thin wide ring for higher thrust capacity

The last two digits (00 through 99) encode the bore diameter. For numbers 04 and above, multiply by 5 to get the bore in millimeters. For example, 6208 has a 40 mm bore (08 x 5).

## Load Capacity and Speed Limits

Deep groove ball bearings have a low friction coefficient, which translates into high limiting speeds. They can run at 10,000 rpm or higher in small sizes when lubricated properly. The dynamic load rating C varies by series and bore size, typically ranging from a few kN for miniature bearings to over 50 kN for large 6300-series units.

Because the contact angle is near zero, pure axial load should not be applied alone. When axial load dominates, use [thrust ball bearings](/thrust-bearings.html) or [angular contact ball bearings](/angular-contact-ball-bearings.html) instead.

## Typical Applications

Deep groove ball bearings appear in almost every rotating machine category:

- Electric motors and generators (both drive-end and fan-end bearings)
- Household appliances (washing machines, fans, vacuum cleaners)
- Automotive systems (alternators, clutches, wheel hubs in small cars)
- Transmission gearboxes and reducer units
- Pumps, blowers and compressors
- Office equipment (printers, scanners, small servo motors)

## Frequently Asked Questions

### What does 2RS mean on a deep groove ball bearing?

2RS indicates double-sided contact rubber seals. The bearing is pre-greased and sealed for life; it should not be washed or relubricated unless the application specifically calls for it.

### Can a deep groove ball bearing carry axial load?

Yes, it can carry moderate axial load in both directions as long as radial load is also present. Pure axial load without radial load causes sliding contact and early failure.

### What is the difference between ZZ and 2RS bearings?

ZZ (or 2Z) uses non-contact steel shields - better for high speed, less effective sealing. 2RS uses contact rubber seals - better protection against dust and moisture, slightly lower speed limit.

### How do I read a 6205-2RS bearing number?

6 = deep groove ball bearing type. 2 = dimension series (medium). 05 = 25 mm bore (05 x 5). 2RS = double rubber seals. The full number tells you bore, outside diameter, width and seal configuration.

## Related Reading

- [What Is a Rolling Bearing? Components, Types &amp; Working Principle](/bearing-basics/58122.html)
- [Browse Angular Contact Ball Bearings](/angular-contact-ball-bearings.html)
- [Browse Self-Aligning Ball Bearings](/self-aligning-ball-bearings.html)

## Need a Specific Deep Groove Ball Bearing?

MS Bearing supplies the full 6000, 6200, 6300, 6700, 6800 and 6900 series in open, shielded and sealed variants. All bearings are manufactured to ISO dimensions, CE certified, and backed by a 24-month warranty. Send us your bore, OD and width requirements, and we will confirm availability and factory-direct pricing within 24 hours.
