---
title: "Thrust Bearings: Ball vs Roller, Load Direction and Speed Limits"
date: 2026-11-09
description: "Thrust bearings are designed exclusively to carry axial (thrust) loads parallel to the shaft axis. They cannot support radial load at all. When a rotating shaft..."
source: https://en.mshjzc.com/bearing-basics/58132.html
---

# Thrust Bearings: Ball vs Roller, Load Direction and Speed Limits

[Thrust bearings](/thrust-bearings.html) are designed exclusively to carry axial (thrust) loads parallel to the shaft axis. They cannot support radial load at all. When a rotating shaft experiences significant axial force - from a gear set, a propeller, a crane hook or a vertical pump - a thrust bearing is required to locate it axially. This guide explains the two main families: thrust ball bearings and thrust roller bearings.

See also our overview of [rolling bearing types](/bearing-basics/58122.html) and [deep groove ball bearings](/bearing-basics/58127.html), which handle combined but not pure axial load.

## Basic Structure

A thrust ball bearing consists of three washers:

- **Shaft washer** - the ring with a bore that fits the shaft and rotates with it
- **Housing washer** - the ring with a larger bore that sits stationary in the housing
- **Ball and cage assembly** - the rolling elements held by a cage between the two washers

The two washers are completely separable. This makes installation straightforward but also means the bearing cannot locate radial position - a separate radial bearing must be used alongside it.

## Single-Direction vs Double-Direction

### Single-Direction (51100 / 51200 / 51300 Series)

One shaft washer, one housing washer and one ball set. Carries axial load in one direction only. Used when the shaft is located radially by another bearing and needs to be fixed axially in one direction.

### Double-Direction (52200 / 52300 Series)

Two shaft washers, one center housing washer and two ball sets. Carries axial load in both directions. Used for vertical shafts, crane hooks and other applications where thrust reverses direction.

## Why Thrust Bearings Have Strict Speed Limits

Because the balls rotate in a horizontal plane under axial load, centrifugal force acts outward on the balls. At high speed, the balls slide against the raceway and generate heat. Thrust ball bearings therefore have much lower speed limits than radial ball bearings of the same size. They are rated for low to moderate speed applications.

For high-speed axial load, angular contact ball bearings mounted in a pair or tandem arrangement are preferred.

## Thrust Roller Bearings for Heavy Load

When axial load is too high for a ball thrust bearing, thrust roller bearings are used:

### Cylindrical Thrust Roller Bearings (81100 / 81200)

Cylindrical rollers running on flat washers. High axial load capacity, but the rollers must be guided radially by a separate alignment washer. Suitable for low-speed heavy thrust applications.

### Tapered Thrust Roller Bearings (29400 Series)

Tapered rollers on inclined raceways. Can carry very heavy axial load plus some radial load in a single unit. Common in crane hooks, oscillating screens and large gearboxes.

### Spherical Thrust Roller Bearings (29200 / 29300 / 29400)

Barrel-shaped rollers on a spherical housing washer. Self-aligning, extremely high axial load capacity. Used in large vertical pumps, marine gears and heavy excavator swing drives.

## Typical Applications

- Crane hooks and hoist mechanisms (tapered or spherical thrust rollers)
- Vertical pump shafts and mixers
- Gearbox shaft axial location (thrust balls for light load)
- Steering gear and swivels
- Machine tool rotary tables
- Automotive clutch release bearings

## Frequently Asked Questions

### Can I use a thrust bearing alone without a radial bearing?

No. Thrust bearings have no radial location capability. The shaft must be supported radially by a separate deep groove, cylindrical or self-aligning bearing. The thrust bearing only fixes the axial position.

### What is the difference between 51205 and 53205?

51205 is a flat-back single-direction thrust ball bearing. 53205 has a spherical seat on the housing washer, which allows angular misalignment between the shaft and housing. The spherical seat needs a matching seat washer.

### Why do thrust ball bearings fail at high speed?

Centrifugal force causes the balls to creep and slide on the raceway, generating frictional heat. At speeds above the rated limit, the lubricant breaks down and the balls brinell the raceway. Use angular contact bearings instead for high-speed thrust.

## Related Reading

- [What Is a Rolling Bearing? Components, Types &amp; Working Principle](/bearing-basics/58122.html)
- [Angular Contact Ball Bearings for High-Speed Thrust](/angular-contact-ball-bearings.html)
- [Browse Spherical Roller Bearings](/spherical-roller-bearings.html)

## Need Thrust Bearings?

MS Bearing supplies thrust ball bearings (51100, 51200, 51300), cylindrical thrust roller bearings and spherical thrust roller bearings (29000 series). All units are CE certified and dimensionally interchangeable. Send us your axial load, speed and shaft size, and our engineers will recommend the correct thrust series for your application.
