---
title: "Electric Motor Bearings: Selection and Common Failures"
date: 2026-11-09
description: "Electric motors are the most common bearing application in industry. Selecting the right motor bearing prevents 80 percent of unplanned downtime. This guide cov..."
source: https://en.mshjzc.com/bearing-engineering-applications/58164.html
---

# Electric Motor Bearings: Selection and Common Failures

Electric motors are the most common bearing application in industry. Selecting the right motor bearing prevents 80 percent of unplanned downtime. This guide covers how motor bearings are chosen and why they fail.

See also [electric fluting](/bearing-installation-failure/58154.html) and [speed limits](/bearing-selection-guide/58139.html).

## Two Bearings, Two Jobs

Almost every motor uses two bearings:

- **Drive end (DE)** - fixed bearing, takes belt or coupling load, usually a deep groove ball bearing
- **Fan end (NDE)** - floating bearing, allows thermal expansion, usually a deep groove ball bearing with loose outer ring

Large motors (above 100 kW) often use cylindrical roller bearings at the drive end for heavy radial load.

## Standard Motor Bearing Selection

- **Small motors (&lt; 15 kW)** - 62xx or 63xx deep groove, 2RS sealed, C3 clearance
- **Medium motors (15-100 kW)** - 63xx deep groove at drive end, NU/N cylindrical at fan end
- **Large motors (&gt; 100 kW)** - NU/N cylindrical roller at drive end, deep groove at fan end

## Why C3 Clearance Is Standard

The inner ring runs 5 to 15 C hotter than the outer ring because heat conducts through the shaft. That expansion reduces internal clearance. C3 provides the extra room so the bearing does not run hot. C0 clearance in a motor almost always overheats.

## Why 2RS Seals Are Common

Sealed bearings are pre-greased and maintenance-free. In a clean motor environment, NBR contact seals last 5 to 8 years. This is simpler than housing seals and relubrication fittings.

## VFD Motors Need Extra Protection

Variable frequency drives induce shaft voltage that discharges through the bearings, causing electric fluting. For VFD motors:

- Use insulated (INSOCOAT) bearings on the fan end, or
- Fit a shaft grounding ring, or
- Use hybrid ceramic bearings for critical applications

## Common Motor Bearing Failures

- Over-greasing (if relubricated) - hot bearing
- Electric fluting on VFD drives - washboard grooves
- Contamination from belt dust - abrasive wear
- Shaft misalignment - edge loading and early spalling

## Frequently Asked Questions

### Can I use ZZ instead of 2RS in a motor?

Yes, in clean indoor environments. ZZ has less friction and runs cooler. Use 2RS if the motor is in a dusty or damp location.

### How long should a motor bearing last?

40,000 to 80,000 hours for normal duty. If a motor bearing fails before 20,000 hours, investigate alignment, lubrication and VFD grounding.

### Do I need to relubricate sealed motor bearings?

No. 2RS bearings are greased for life. Adding more grease overfills and overheats them. Only relubricate open-bearing motors with a zerk fitting.

## Related Reading

- [Electric Fluting](/bearing-installation-failure/58154.html)
- [Internal Clearance](/bearing-selection-guide/58138.html)
- [Seal Selection](/bearing-selection-guide/58142.html)

## Need Motor Bearings?

MS Bearing supplies direct replacements for all standard electric motor bearing sizes, including insulated (INSOCOAT) and hybrid ceramic options for VFD duty. Send us your motor model or bearing number, and we will confirm stock and price.
