---
title: "Conveyor Roller Bearings: Idler Sealed Units for Bulk Handling"
date: 2026-11-09
description: "Conveyor idlers are the most numerous bearings on any bulk material handling site. There are thousands of them on a single belt conveyor, and they must run for ..."
source: https://en.mshjzc.com/bearing-engineering-applications/58170.html
---

# Conveyor Roller Bearings: Idler Sealed Units for Bulk Handling

Conveyor idlers are the most numerous bearings on any bulk material handling site. There are thousands of them on a single belt conveyor, and they must run for years with no maintenance. This guide explains how idler bearings are designed.

See also [deep groove bearings](/bearing-basics/58127.html).

## What Is a Conveyor Idler?

A conveyor idler is a steel tube mounted on a stationary axle, supported by two bearings pressed into the ends of the tube. The belt rolls over the top. The bearings are deep groove ball bearings pre-greased and sealed for life.

A typical 1200 mm belt conveyor has hundreds of idlers spaced every meter. They run at slow speed (under 300 rpm) but must survive dust, moisture and weather.

## Idler Bearing Design

An idler bearing is not just a 6204 bearing. The housing is a pressed steel cup that holds a standard deep groove bearing. The seal system is critical:

- Rubber contact seal on the bearing itself (2RS)
- Additional felt or labyrinth seal in the end cap
- Grease packed in the cavity between bearing and seal

This triple seal arrangement keeps coal dust, ore dust and water out for 50,000 hours or more.

## Typical Idler Bearing Sizes

- Light duty (small belts) - 6204, 6205 deep groove
- Medium duty - 6305, 6306
- Heavy duty (large belts) - 6308, 6309

Most idlers use C3 clearance and NBR contact seals.

## Why Idler Bearings Fail

- Water washout after rain - seals broken
- Dust ingress through damaged seals
- Static load brinelling when the belt is parked with material on it
- Out-of-balance rollers causing vibration and false brinelling

## Frequently Asked Questions

### How long should idler bearings last?

Good quality idlers last 50,000 to 80,000 hours. Cheap idlers fail in 5,000 to 10,000 hours from poor seals. The idler replacement cost over a mine's life dwarfs the upfront price difference.

### Can I relubricate idler bearings?

Most modern idlers are sealed and cannot be relubricated. Some heavy-duty idlers have a grease zerk, but relubricating thousands of idlers is impractical. Choose sealed units and replace them when they fail.

### What does a bad idler sound like?

A rhythmic clunk or rattle as the belt passes over it. Walk the conveyor and listen. Bad idlers damage the belt and add drag.

## Related Reading

- [Deep Groove Ball Bearings](/bearing-basics/58127.html)
- [Seals and Shields](/bearing-selection-guide/58142.html)
- [Mining Bearings](/bearing-engineering-applications/58166.html)

## Need Conveyor Idler Bearings?

MS Bearing supplies deep groove bearings for conveyor idlers with heavy-duty triple seal arrangements and long-life lithium grease. Send us your idler specifications, and we will confirm the correct bearing and price.
