---
title: "What Is C3 Clearance? Bearing Internal Clearance Explained"
date: 2026-11-09
description: "When you look at a bearing number such as 6205-2RS/C3, the trailing C3 describes the internal radial clearance of the bearing—the total distance the inner ring ..."
source: https://en.mshjzc.com/bearing-basics/58176.html
---

# What Is C3 Clearance? Bearing Internal Clearance Explained

When you look at a bearing number such as 6205-2RS/C3, the trailing **C3** describes the internal radial clearance of the bearing—the total distance the inner ring can move radially relative to the outer ring before installation. Internal clearance directly affects load distribution, heat generation, noise, vibration and fatigue life. Choosing the wrong clearance class is a frequent cause of early bearing failure.

## What Is Internal Clearance?

Internal clearance is the small gap between the rolling elements and the raceways when no load is applied. For a radial bearing, it is measured as the radial displacement between inner and outer ring. For angular contact and thrust bearings, axial clearance matters instead.

Manufacturers produce bearings in several standardized clearance groups. The most widely used are defined in ISO 5753 and mapped to the C classes shown below.

<table border="1" cellpadding="6" cellspacing="0" style="border-collapse:collapse;width:100%;"><tr style="background:#f0f0f0;"><th>Class</th><th>Meaning</th><th>Typical use</th></tr><tr><td>C2</td><td>Clearance smaller than normal</td><td>High precision, preloaded arrangements, light interference</td></tr><tr><td>C0 (Normal)</td><td>Standard clearance, usually not marked</td><td>Normal fits, normal temperatures</td></tr><tr><td>C3</td><td>Clearance larger than normal</td><td>Interference fits, temperature differential, most common choice</td></tr><tr><td>C4</td><td>Clearance larger than C3</td><td>Heavy interference, inner ring heat, high temperature rise</td></tr><tr><td>C5</td><td>Clearance larger than C4</td><td>Extreme differential expansion, special applications</td></tr></table>

## Why C3 Is the Default Choice

In most industrial applications, the inner ring is mounted with an interference fit on the shaft. Pressing the inner ring onto a shaft expands it slightly, which reduces the effective internal clearance. At the same time, the inner ring runs hotter than the outer ring during operation, further shrinking the clearance. A C3 bearing absorbs both effects and leaves a safe residual clearance at running temperature.

This is why catalogs and suppliers default to C3 for most deep groove ball bearings, [cylindrical roller bearings](/cylindrical-roller-bearings.html) and spherical roller bearings. C0 is often reserved for shaft-hub combinations with transition fits or for very small instrument bearings.

## When to Choose C2, C4 or C5

**C2** is selected when the bearing must run stiff and quiet, such as in [machine tool spindles](/bearing-installation-failure/58168.html), small electric motors with light loads, and precision gearboxes where preload or very tight radial rigidity is required. C2 is also used when the outer ring is the interference fit component (outer ring rotates, inner ring floats).

**C4** is used when the inner ring is heavily interfered, when the inner ring runs significantly hotter than the outer ring, or when the shaft is steel and the housing is aluminum (different thermal expansion). Examples include large fan bearings, railroad axleboxes and vibrating screens.

**C5** is reserved for extreme temperature differentials, heavy shock loads and specialized applications such as continuous casters or large vibrating screens. It is rarely required in general industry.

## How Fits Change Effective Clearance

Mounting a bearing on a shaft with interference fit reduces radial clearance. Roughly, an interference of 0.01 mm on the inner ring of a 50 mm bore bearing consumes about 0.008–0.012 mm of radial clearance. At running temperature, the inner ring expands more than the outer ring, removing a further 0.005–0.015 mm depending on temperature rise and housing material.

Always calculate the residual clearance: starting clearance minus fit reduction minus thermal reduction. If the result is near zero or negative, the bearing will run hot and seize. If the result is too large, the bearing will rattle, skid and suffer false brinelling.

## C3 vs C0 in Common Bearing Types

[Deep groove ball bearings](/deep-groove-ball-bearings.html) in electric motors, pumps and fans are almost always C3. [Self-aligning ball bearings](/self-aligning-ball-bearings.html) and [spherical roller bearings](/spherical-roller-bearings.html) on plummer blocks typically ship C3 as standard. [Tapered roller bearings](/tapered-roller-bearings.html) and [angular contact ball bearings](/angular-contact-ball-bearings.html) are set by axial preload rather than radial clearance class, so C suffixes are less relevant.

## FAQ

**Q: Is C3 bigger or smaller than normal clearance?**  
A: C3 is larger than normal (C0). It is the most common choice for general industry.

**Q: Can I replace a C3 bearing with a C0 bearing?**  
A: Only if your application has light fits and small temperature rise. In typical motor or fan shafts, replacing C3 with C0 will consume most of the clearance through fit and heat, leading to overheating.

**Q: Does C3 mean quieter or noisier?**  
A: C3 itself does not set noise. Noise is controlled by tolerance class and vibration grade. C3 simply provides more internal room.

**Q: What does C3 mean on a sealed bearing?**  
A: Sealed and shielded bearings (2RS, ZZ) are greased and sealed at the factory; C3 still describes the internal clearance and is selected the same way as open bearings.

## Related Reading

- [Bearing Internal Clearance: C2, C0, C3, C4 and C5 Selection](/bearing-selection-guide/58138.html)
- [Bearing Fitting Tolerances: Shaft and Housing Fits](/bearing-selection-guide/58137.html)
- [Bearing Designation System: How to Read Bearing Numbers](/bearing-basics/58135.html)

*Need help selecting the right clearance class for your application? [Contact our bearing engineers](/contact-us.html) with your bore, outer diameter, fit and operating temperature—we will recommend the correct C class.*
