---
title: "Bearing Cage Types: Pressed Steel, Brass, Nylon, Machined"
date: 2026-11-09
description: "The cage is often the most overlooked part of a bearing. It keeps rolling elements evenly spaced, prevents them touching each other, and guides lubricant. The c..."
source: https://en.mshjzc.com/bearing-basics/58189.html
---

# Bearing Cage Types: Pressed Steel, Brass, Nylon, Machined

The cage is often the most overlooked part of a bearing. It keeps rolling elements evenly spaced, prevents them touching each other, and guides lubricant. The cage material limits maximum speed, temperature and shock resistance. When a bearing fails in a specific way—cage wear, broken pocket, cage roller chatter—the cage type is often the root cause.

## Pressed Steel Cage (J, W, MR)

Stamped steel sheets formed into two riveted halves are the most common cage in deep groove ball and small roller bearings. They are cheap, strong, temperature-resistant to about 120–150°C, and work with grease or oil. Pressed steel is the default in electric motors, pumps and general industry.

## Machined Brass Cage (M, Y)

A solid bronze or brass cage is machined from bar stock. It handles shock loads, high temperature and heavy oil. It is common in [cylindrical roller bearings](/cylindrical-roller-bearings.html), gearboxes and locomotive traction motors. Brass cages tolerate higher temperatures than nylon and resist edge loading. They are heavier and more expensive than pressed steel.

## Polyamide / Nylon Cage (TN9, TNH, TVP)

Glass-fiber reinforced polyamide cages reduce noise, damp vibration and run light. They are used in electric motors, household appliances and high-speed pumps. Nylon cages are limited to about 120°C continuous (some grades to 150°C) and are sensitive to certain lubricant additives. They are the quietest option.

## Solid Bronze / Machined Steel

Very large bearings and ultra-precision spindles use solid bronze or hardened steel machined cages. These handle extreme speeds and loads and are used in [machine tool spindles](/bearing-installation-failure/58168.html) and large industrial gearboxes.

## Choosing the Cage

<table border="1" cellpadding="6" cellspacing="0" style="border-collapse:collapse;width:100%;"><tr style="background:#f0f0f0;"><th>Condition</th><th>Cage choice</th></tr><tr><td>Low noise, light load, motor</td><td>Polyamide TN9</td></tr><tr><td>General industry, grease</td><td>Pressed steel J</td></tr><tr><td>Shock, gearbox, high temp</td><td>Machined brass M</td></tr><tr><td>High speed spindle</td><td>Ground phenolic or brass</td></tr></table>

## FAQ

**Q: Can I mix cage types in a matched pair?**  
A: No. Matched sets are supplied with matched cages. Mixing changes preload and noise.

**Q: Is a brass cage always better than steel?**  
A: Not always. Brass is heavier and costs more. Pressed steel is perfectly adequate for most motor and fan duty.

## Related Reading

- [Bearing Designation System and Suffix Codes](/bearing-basics/58135.html)
- [Cylindrical Roller Bearings N/NU/NJ/NUP](/bearing-basics/58129.html)
- [Lubricant Viscosity Selection](/bearing-lubrication-maintenance/58147.html)

*Specifying a cage for high temperature or high speed? [Tell us operating temperature and rpm](/contact-us.html)—we will confirm cage material compatibility.*
