---
title: "Cylindrical Roller Bearing N, NU, NJ, NUP, EJ Types Compared"
date: 2026-11-09
description: "Cylindrical roller bearings carry very high radial load and run fast. Their designation tells you exactly which rings have flanges—and therefore how the shaft i..."
source: https://en.mshjzc.com/bearing-selection-guide/58190.html
---

# Cylindrical Roller Bearing N, NU, NJ, NUP, EJ Types Compared

[Cylindrical roller bearings](/cylindrical-roller-bearings.html) carry very high radial load and run fast. Their designation tells you exactly which rings have flanges—and therefore how the shaft is located axially. Choosing the right variant matters in fixed-free arrangements.

## Ring Flange Configuration

<table border="1" cellpadding="6" cellspacing="0" style="border-collapse:collapse;width:100%;"><tr style="background:#f0f0f0;"><th>Variant</th><th>Inner ring</th><th>Outer ring</th><th>Axial location</th></tr><tr><td>N</td><td>Two flanges</td><td>No flange</td><td>Outer ring floats</td></tr><tr><td>NU</td><td>No flanges</td><td>Two flanges</td><td>Inner ring floats</td></tr><tr><td>NJ</td><td>Two flanges</td><td>One flange</td><td>Locates one axial direction</td></tr><tr><td>NUP</td><td>Two flanges + loose ring</td><td>Two flanges</td><td>Locates both axial directions</td></tr><tr><td>NH / NJ+H</td><td>Two flanges + loose H ring</td><td>One flange</td><td>Becomes a two-direction locator with H ring</td></tr></table>

## Fixed-Free Arrangement

In a typical gearbox or motor, one bearing is the fixed (locating) side and the other is the floating side. NU or N bearings are used as floating supports: the inner or outer ring slides axially to absorb thermal expansion. NJ or NUP bearings are used as fixed locators because they guide axial load in one or both directions. See [fixed-free arrangement](/bearing-selection-guide/58141.html).

## E, EC, ECM Internal Design

Modern cylindrical roller bearings carry E (optimized internal design, more rollers, higher capacity) and EC (improved machined brass cage). An NU210ECM carries roughly 20–30% more load than a plain NU210. Always look for E or EC suffixes when replacing an old unit.

## When to Choose Cylindrical vs Ball Bearings

Pick cylindrical roller when radial load is high and speed is high, such as in gearboxes, motor shafts and pinions. Pick deep groove ball when load is moderate and cost matters. Cylindrical roller bearings cannot carry much axial load on their own—use a separate thrust bearing or an angular contact pair for axial.

## FAQ

**Q: Is NU a floating bearing?**  
A: Yes. The inner ring has no flanges, so the inner ring and roller cage can slide axially relative to the outer ring.

**Q: Can NJ take axial load both ways?**  
A: No. NJ locates axial in one direction only. Add an H ring (NH) or use NUP for both directions.

## Related Reading

- [Cylindrical Roller Bearings: N/NU/NJ/NUP Series](/bearing-basics/58129.html)
- [Bearing Arrangement: Fixed-Free, Back-to-Back, Tandem](/bearing-selection-guide/58141.html)
- [Gearbox Bearings](/bearing-engineering-applications/58166.html)

*Specifying N-series bearings for a gearbox? [Tell us which ring floats and which locates](/contact-us.html)—we will confirm the variant and E/EC design.*
