---
title: "Brinelling vs False Brinelling: How to Tell the Difference"
date: 2026-11-09
description: "Both true brinelling and false brinelling leave evenly spaced indentations on the raceway. They look similar but have opposite causes. Mixing them up leads to t..."
source: https://en.mshjzc.com/bearing-installation-failure/58197.html
---

# Brinelling vs False Brinelling: How to Tell the Difference

Both true brinelling and false brinelling leave evenly spaced indentations on the raceway. They look similar but have opposite causes. Mixing them up leads to the wrong repair. This guide shows how to tell them apart.

## True Brinelling (Overload)

True brinelling happens when static or shock load exceeds the contact fatigue limit. The rolling elements press into the raceway and leave permanent indentations spaced exactly one rolling element diameter apart. The indentations are shiny, metal-displaced ridges, and they occur where the load was heaviest. See [static safety factor S0](/bearing-installation-failure/58184.html).

## False Brinelling (Fretting)

False brinelling happens when the bearing does not rotate, or oscillates through a very small angle. The rolling elements rock back and forth, squeezing out the lubricant. Metal-to-metal contact creates fretting wear and a rust-brown groove. The marks are evenly spaced but filled with fine wear particles. See [false brinelling and fretting](/bearing-installation-failure/58155.html).

## Comparison

<table border="1" cellpadding="6" cellspacing="0" style="border-collapse:collapse;width:100%;"><tr style="background:#f0f0f0;"><th>Feature</th><th>True brinelling</th><th>False brinelling</th></tr><tr><td>Cause</td><td>Overload / shock</td><td>Micro-motion, lost oil film</td></tr><tr><td>Color</td><td>Shiny, displaced metal</td><td>Rust-brown, fine dust</td></tr><tr><td>Shape</td><td>Indentation ridges</td><td>Worn grooves</td></tr><tr><td>When it happens</td><td>During load or impact</td><td>During transport, standstill</td></tr><tr><td>Fix</td><td>Upsize bearing, raise S0</td><td>Improve lubrication, eliminate micro-motion</td></tr></table>

## FAQ

**Q: Does false brinelling mean the bearing is bad?**  
A: Early false brinelling may still run if the grooves are shallow. Once rust pits connect, replace the bearing.

**Q: How do I prevent it during transport?**  
A: Rotate shafts periodically or lock the rotor against oscillation. Fill bearings with fresh grease before shipping.

## Related Reading

- [False Brinelling and Fretting Corrosion](/bearing-installation-failure/58155.html)
- [Static Load Safety Factor S0](/bearing-installation-failure/58184.html)
- [Bearing Damage Quick Reference](/bearing-installation-failure/58160.html)

*Analyzing raceway marks? [Send us photos](/contact-us.html)—we will help distinguish overload from fretting.*
