---
title: "Reciprocating and Screw Compressor Bearings: Selection"
date: 2026-11-09
description: "Compressors are among the toughest bearing applications: pulsating load, high speed, oil lubrication and frequent starts. Bearing failure in a compressor stops ..."
source: https://en.mshjzc.com/bearing-engineering-applications/58200.html
---

# Reciprocating and Screw Compressor Bearings: Selection

Compressors are among the toughest bearing applications: pulsating load, high speed, oil lubrication and frequent starts. Bearing failure in a compressor stops production, so selection is critical.

## Reciprocating Compressors

Reciprocating compressors have crankshafts with heavy radial and axial loads. Main bearings are usually [cylindrical roller bearings](/cylindrical-roller-bearings.html) for the crank supports, plus thrust bearings for axial load. Shock load means high static safety factor S0—typically 2 or more. See [S0](/bearing-installation-failure/58184.html).

## Screw Compressors

Oil-injected screw compressors run at high speed with combined radial and axial load. The male and female rotors are supported by [cylindrical roller bearings](/cylindrical-roller-bearings.html) (radial) and [angular contact ball bearings](/angular-contact-ball-bearings.html) or tapered roller bearings (axial thrust). The oil system also cools the bearings.

## Centrifugal Compressors

High-speed centrifugal compressors use [precision angular contact bearings](/angular-contact-ball-bearings.html) tilting pad or active magnetic bearings. Oil-film and oil-air lubrication are standard. Speed limits are critical—see [speed limits](/bearing-selection-guide/58139.html).

## FAQ

**Q: Why do compressor bearings fail?**  
A: Oil contamination, liquid slugging and high starts/stops are common. Keep the oil clean and change filters on schedule.

**Q: Are compressor bearings special?**  
A: Yes. They usually need higher static safety factor, oil lubrication and tighter tolerance than general duty.

## Related Reading

- [Centrifugal Pump Bearings](/bearing-engineering-applications/58165.html)
- [Gearbox Bearings](/bearing-engineering-applications/58166.html)
- [Static Load Safety Factor S0](/bearing-selection-guide/58184.html)

*Sizing bearings for a screw or reciprocating compressor? [Tell us compressor type and power](/contact-us.html)—we recommend radial and thrust arrangements.*
