---
title: "6304 Bearing Specification"
date: 2026-11-12
description: "What are the 6304 bearing specifications? The 6304 bearing specification defines a standard 20 mm bore bearing with a 52 mm outer diameter and a 15 mm width, en..."
source: https://en.mshjzc.com/blog/58215.html
---

# 6304 Bearing Specification

What are the 6304 bearing specifications? The 6304 bearing specification defines a standard 20 mm bore bearing with a 52 mm outer diameter and a 15 mm width, engineered for rotating shafts across industrial, automotive, and agricultural machinery. According to **MS Bearings factory data 2024** and **ISO 15:2017**, a standard 6304 deep groove ball bearing supports a basic dynamic load rating of approximately 12.2 kN and a static load rating of 5.0 kN. B2B buyers and OEM engineers rely on these specifications to ensure proper shaft alignment, load distribution, and rotational speed compatibility. Operating at speeds up to 15,000 RPM depending on lubrication and seal type, this component handles radial and axial forces in pumps, electric motors, gearboxes, conveyors, and agricultural equipment. Every batch from our **ISO 9001:2015** certified facility in Kunshan, Jiangsu, undergoes rigorous dimensional and metallurgical testing to match SKF, FAG, and NSK equivalents. Backed by a **12-month warranty** and **24-hour dispatch**, we supply OEM buyers, distributors, and maintenance technicians across more than 30 countries.

## Dimensional Specifications and Tolerances

Accurate dimensions determine whether a bearing will seat correctly within a housing or shaft. The 6304 bearing specification follows strict tolerance standards defined by ISO 15:2017.

<table><thead><tr><th>Tolerance Grade</th><th>Bore (mm)</th><th>OD (mm)</th><th>Width (mm)</th><th>Ra Surface Finish</th></tr></thead><tbody><tr><td>P0 (Standard)</td><td>20 (+0 / -0.010)</td><td>52 (+0.013 / -0)</td><td>15 (+0 / -0.011)</td><td>0.8 μm</td></tr><tr><td>P6 (High Precision)</td><td>20 (+0 / -0.006)</td><td>52 (+0.008 / -0)</td><td>15 (+0 / -0.007)</td><td>0.4 μm</td></tr></tbody></table>

Per **ISO 15:2017**, the P0 tolerance is standard for general industrial applications, while P6 is required for high-speed electric motors or precision machine tools. Most OEM engineers specify P0 for gearboxes and conveyor pulleys due to cost-effectiveness and adequate performance. Radial internal clearance typically ranges from 10 to 20 μm, which accommodates thermal expansion at operating temperatures up to 120°C. Always verify the housing and shaft machining tolerances before installation to prevent inner ring creep, a common failure mode in continuous-duty applications.

## Dynamic and Static Load Ratings

Load capacity determines the service life and reliability of the assembly. The 6304 bearing specification defines both basic dynamic and static load ratings.

<table><thead><tr><th>Load Type</th><th>Value (kN)</th><th>Source Standard</th><th>Typical Application</th></tr></thead><tbody><tr><td>Basic Dynamic (C9)</td><td>12.2</td><td>ISO 281:2007</td><td>Electric motors, conveyors</td></tr><tr><td>Basic Static (C0)</td><td>5.0</td><td>ISO 76:2006</td><td>Agricultural machinery</td></tr></tbody></table>

The basic dynamic load rating of **12.2 kN** is calculated under standard conditions with proper lubrication. Static load capacity considers permanent deformation of the rolling elements and raceways. For heavy-duty applications like wind turbine pitch systems or heavy construction equipment, engineers should consult our cylindrical roller or spherical roller product lines, which offer higher load densities for the same bore size. Under lubricated conditions, a 6304 bearing can sustain moderate radial and axial forces, making it suitable for light-to-medium industrial machinery.

## Operating Speed, Temperature, and Seal Options

Performance parameters vary significantly based on seal configuration and lubrication method.

- **Limiting Speed:** 15,000 RPM (grease), 18,000 RPM (oil). Per **SKF 2024 catalog**, these limits ensure safe operation without excessive heat generation or cage wear.
- **Working Temperature:** -30°C to 120°C continuous. For higher-temperature environments, special high-temperature grease or custom heat treatment is required.
- **Seal Options:** Available as a double-sided metal shield (ZZ) for low-friction, high-speed applications, or double-sided rubber seal (2RS) for enhanced dust and moisture protection in dirty environments like agricultural machinery.

> Expert Tip: Open-type bearings offer maximum cooling for high-speed gearboxes, but they require precise oil mist lubrication systems to prevent contamination and premature wear.

## Material, Lubrication, and Maintenance Guidelines

Proper material selection and maintenance extend service life significantly. Follow this step-by-step maintenance routine for 6304 assemblies.

1. **Initial Lubrication:** Fill 30% to 50% of the free space with lithium-based grease (e.g., ISO VG 100). Overpacking causes excessive heat and leakage.
2. **Re-lubrication Interval:** 3,000 to 5,000 hours under normal loads and speeds. Monitor temperature and noise to determine exact intervals.
3. **Failure Diagnostics:** If the bearing exhibits abnormal noise or vibration, check for improper fit, inadequate lubrication, or external contamination. Replace damaged components immediately to prevent secondary damage.
4. **Mounting and Dismounting:** Always apply force to the inner ring when mounting on a shaft. Use appropriate tools like bearing pullers to avoid damaging the raceways. Never strike the outer ring directly.

## OEM Replacement, Sourcing, and Application Scenarios

As a direct factory supplier, MS Bearings provides OEM-compatible 6304 bearings that serve as drop-in replacements for major brands. We export to North America, Europe, Southeast Asia, and the Middle East with a **minimum order quantity (MOQ) of 100 pieces**. Delivery is typically within 24 hours for stocked items.

- **Pumps &amp; Motors:** Ensures smooth rotation in centrifugal pumps and electric motors operating at 50 Hz or 60 Hz.
- **Gearboxes:** Handles moderate radial loads in speed reducers and transmission systems.
- **Agricultural Machinery:** 2RS sealed versions protect against dust and water in tractors and harvesters.
- **Custom Solutions:** Non-standard materials, coatings, or tolerances available upon request for specialized projects.

Engineers seeking precise 6304 bearing specification sheets, 3D models, or factory pricing can download technical catalogs directly at mshjzc.com, where ISO 9001:2015-certified production ensures consistent quality for global B2B distribution.

What are the precise dimensions of a 6304 bearing?

The 6304 bearing has a bore diameter of 20 mm, an outer diameter of 52 mm, and a width of 15 mm. Tolerances conform to ISO 15:2017 P0 or P6 grades depending on the application.

How much grease is recommended for initial lubrication?

Fill 30% to 50% of the internal free space with a high-quality lithium grease. Overlubrication increases friction and heat, while under-lubrication causes premature wear.

Can a 6304 bearing operate at 1500 RPM continuously?

Yes, 1500 RPM is well within the 15,000 RPM limiting speed. Continuous operation at this speed requires proper lubrication and a temperature range between -30°C and 120°C.

What is the warranty period for MS Bearings products?

All 6304 bearings carry a standard 12-month warranty from the date of shipment, covering manufacturing defects and material faults under normal use conditions.
