---
title: "6305 Bearing Size Guide 2026"
date: 2026-11-12
description: "What is 6305 bearing size? The 6305 bearing size is 25 mm inner diameter (bore), 62 mm outer diameter, and 17 mm width, standardized per ISO 15:2017. This dimen..."
source: https://en.mshjzc.com/blog/58217.html
---

# 6305 Bearing Size Guide 2026

**What is 6305 bearing size?** The 6305 bearing size is 25 mm inner diameter (bore), 62 mm outer diameter, and 17 mm width, standardized per ISO 15:2017. This dimension set fits shafts around 25 mm and housing bores around 62 mm in electric motors, pumps, gearboxes, conveyors, agricultural machinery, and light automotive applications.

The designation 6305 follows the ISO 15:2017 dimension series logic: the digit 6 indicates the 05 series width and diameter series, and the last two digits multiplied by 5 give the bore in millimeters, so 05 × 5 = **25 mm**. Across the 63 series, the 6305 is a mid-size member between the 6304 and 6306 in both radial space and load rating. Engineers should verify shaft diameter, housing bore, and seat tolerance before replacement or OEM design, because 6305 bearing size determines installation space, alignment capability, speed limit, and lifetime under load.

## 6305 Bearing Size in mm and Inch Dimensions

<table><thead><tr><th>Parameter</th><th>Metric</th><th>Inch</th></tr></thead><tbody><tr><td>Inner diameter (d)</td><td>25 mm</td><td>0.984 in</td></tr><tr><td>Outer diameter (D)</td><td>62 mm</td><td>2.441 in</td></tr><tr><td>Width (B)</td><td>17 mm</td><td>0.669 in</td></tr><tr><td>Fillet radius (r min.)</td><td>1.1 mm</td><td>0.043 in</td></tr><tr><td>Bore type</td><td>Solid or sealed</td><td>Solid or sealed</td></tr></tbody></table>

Per ISO 15:2017, these are the nominal dimensions for the 6305 in metric designation. If your drawing uses inch code or dual-unit verification, confirm the equivalent 25 mm bore before ordering.

## How to Measure and Verify a 6305 Bearing Size

- Measure the bore with a calibrated micrometer at two points 90° apart. A 6305 must read 25 mm ± per the bearing grade.
- Check the outside diameter with a caliper or micrometer across multiple positions; expect **62 mm** nominal.
- Confirm width **17 mm** with a depth gauge or caliper on the ring face.
- Inspect the stamp or laser mark on the side face; a correct marking should match the 6305 size code and the manufacturer data sheet.

> Per ISO 15:2017 and MS Bearings factory data 2024, a tolerance mismatch of just a few micrometers can affect clearance class and race fit. Do not rely on a ruler for 6305 bearing size verification; use calibrated metrology tools and compare against the bearing datasheet.

## 6305 Bearing Size Chart for Common Shaft and Housing Fits

<table><thead><tr><th>Application</th><th>Shaft diameter range</th><th>Housing bore range</th><th>Typical duty</th></tr></thead><tbody><tr><td>Electric motors</td><td>25 mm</td><td>52–62 mm</td><td>Continuous 3000 RPM, IP65 sealing</td></tr><tr><td>Agricultural machinery</td><td>25 mm</td><td>55–62 mm</td><td>Shock load, dust, wet conditions</td></tr><tr><td>Conveyors</td><td>25 mm</td><td>52–62 mm</td><td>Radial and moderate axial load</td></tr><tr><td>Gearboxes</td><td>25 mm</td><td>55–62 mm</td><td>High-speed, vibration, misalignment</td></tr><tr><td>Light automotive</td><td>25 mm</td><td>55–62 mm</td><td>Wheel, pulley, auxiliary shafts</td></tr></tbody></table>

Use this chart to match 6305 bearing size with the available radial space in your housing. If the housing bore is larger than 62 mm, a seat sleeve or a larger series is required to maintain proper interference fit.

## 6305 Bearing Load, Speed and Temperature Limits by Size

Per SKF 2024 catalog and MS Bearings factory data 2024, the 6305 has a dynamic load rating of approximately **14.0 kN** and a static load rating of approximately **22.0 kN**. Basic rated life at 3000 RPM can reach tens of thousands of hours depending on load, lubrication, and clearance. Typical operating speed range is up to **8000–12000 RPM** with proper lubrication, and service temperature range is -30°C to +120°C continuous.

> Confirm the actual load, speed, and temperature against the manufacturer datasheet before fixing the design. The 6305 bearing size sets the mechanical envelope; the lubrication and sealing determine the life and reliability.

## 6305 Bearing Size Selection Guide for OEM Engineers

1. Fix the shaft diameter at **25 mm** and housing bore at **62 mm** or less.
2. Estimate radial load and axial load; use the 6305 dynamic and static ratings from the catalog.
3. Set the required life target in hours and calculate the required basic dynamic load rating with the L10 formula.
4. Choose a type and sealing: deep groove ball for general electric motor duty, cylindrical roller for heavy radial load in gearboxes, tapered roller for combined load in wheel or conveyor applications.
5. Select lubrication, clearance class, and surface finish based on speed and temperature.
6. Validate the final design with the supplier datasheet, drawing, and sample test if required.

- Electric motors: align the 6305 bearing size with shaft diameter 25 mm and housing bore 52–62 mm; choose a deep groove ball with a contact seal for IP65 protection.
- Agricultural machinery: keep 6305 bearing size within the same envelope and select a triple-lip seal to handle dust, water, and shock load.
- Conveyors: use 6305 bearing size with a spherical outer ring if misalignment is expected; confirm the housing bore and mounting position.

## Where to Buy 6305 Bearings at OEM Quality and Volume Prices

- ISO 9001:2015 certified supplier with traceable batch records and material certificates.
- Factory direct supply without distributor markup; MOQ **1000 pieces** for OEM orders.
- Standard 6305 bearing size in stock with 24-hour shipment from Jiangsu Kunshan warehouse.
- OEM replacement for SKF, FAG, NSK equivalents; interchangeable dimensions per ISO 15:2017.
- Export experience to more than 30 countries and technical support for tolerance, clearance, and lubrication.

For engineering data, samples, or volume pricing on 6305 bearing size, review the catalog at **mshjzc.com** or contact MS Bearings factory directly. Our ISO 9001:2015 production line supports 12-month warranty, 24-hour dispatch, and OEM customization for motors, gearboxes, agriculture, conveyors, and pumps.

What is the bore diameter of a 6305 bearing?

The 6305 bore diameter is 25 mm, calculated as 05 × 5 = 25 mm per ISO 15:2017.

What is the outside diameter of a 6305 bearing?

The 6305 outside diameter is 62 mm, which defines the minimum housing bore and radial clearance.

How wide is a 6305 bearing?

The 6305 width is 17 mm, so the housing shoulder distance must be at least 17 mm on the axial direction.

What is the dynamic load rating of a 6305 bearing?

Per SKF 2024 catalog and MS Bearings factory data 2024, the 6305 dynamic load rating is approximately 14.0 kN; static load rating is approximately 22.0 kN.

Can a 6305 bearing run at 10000 RPM?

Yes, with correct lubrication, clearance, and housing fit, the 6305 can run up to 8000–12000 RPM; confirm the specific type and seal in the manufacturer datasheet.

What is the temperature range for a 6305 bearing?

Typical 6305 operating temperature is -30°C to +120°C continuous; special heat treatment can extend to higher temperature with the correct clearance and cage.
