---
title: "6305 Bearing Specification: Complete Size, Load, Speed &amp; Tolerance Guide"
date: 2026-11-12
description: "The 6305 bearing specification covers a 25 mm bore, 62 mm outer diameter and 17 mm width, with dynamic C = 22.4–23.5 kN and static C₀ = 11.5–12.5 kN per ISO 15:..."
source: https://en.mshjzc.com/blog/58218.html
---

# 6305 Bearing Specification: Complete Size, Load, Speed &amp; Tolerance Guide

The 6305 bearing specification covers a 25 mm bore, 62 mm outer diameter and 17 mm width, with dynamic C = 22.4–23.5 kN and static C₀ = 11.5–12.5 kN per ISO 15:2017 and MS Bearings factory data 2024. It is a single-row deep groove ball bearing in the 63 series, with a 17 mm width.

**Are all 6305 bearings identical?** No. The bearing is defined by its ISO 15 dimensions, but C and C₀ ratings, tolerance class (ABEC 1, 3, 5 or ISO P0/P6/P5/P4), seal type and clearance vary by manufacturer. A 6305-ZZ from one brand can carry a different load rating than a 6305-2RS from another.

This guide covers the dimensional 6305 bearing specification, load and speed ratings, tolerances, materials, seals, application fit, and how to read a 6305 bearing drawing.

## What are the dimensions of a 6305 bearing?

Per ISO 15:2017 and the MS Bearings 2024 catalog, the 6305 bearing specification is:

<table><thead><tr><th>Bore (d)</th><th>OD (D)</th><th>Width (B)</th><th>F</th><th>E</th><th>r min</th><th>rs min</th><th>r1-2 min</th></tr></thead><tbody><tr><td>25 mm</td><td>62 mm</td><td>17 mm</td><td>34 mm</td><td>49 mm</td><td>1.0 mm</td><td>1.0 mm</td><td>0.6 mm</td></tr></tbody></table>

**The 6305 bearing size chart is fixed:** 25 × 62 × 17 mm. The F and E values control shaft and housing shoulder clearance, which matters when the bearing is pressed onto a shaft or into a housing.

> Tip: A 6305 bearing has the same outer and width dimensions as a 6205 bearing of the same bore size, but not the same load rating. Do not swap 6205 and 6305 loads without checking C and C₀.

## How much load can a 6305 bearing take?

**What are the load ratings?** In the 63 series deep groove ball family, a 6305 typically carries C = 22.4–23.5 kN and C₀ = 11.5–12.5 kN, depending on the manufacturer. Values below are for the standard 63 series pattern and may change with tolerance, cage and seal.

<table><thead><tr><th>Property</th><th>Typical value (63 series)</th><th>Note</th></tr></thead><tbody><tr><td>Dynamic C</td><td>22.4–23.5 kN</td><td>Rotating load for L₁₀ life</td></tr><tr><td>Static C₀</td><td>11.5–12.5 kN</td><td>Per ISO 15:2017</td></tr><tr><td>Reference speed</td><td>24,000–26,000 RPM</td><td>Grease, oil, or lab data</td></tr><tr><td>Limiting speed</td><td>14,000–15,000 RPM</td><td>Oil, grease, seal, cage</td></tr></tbody></table>

**How do I calculate required life?** Use L₁₀ = (10⁶ / 60N) × (C/P)³ for ball bearings. N = RPM, P = equivalent dynamic load in kN. For a 10,000-hour target, a 6305 with C = 23 kN handles roughly 4–5 kN at 3,000 RPM.

1. Calculate equivalent load P.
2. Divide C by P.
3. Raise to the power of 3 for ball bearings.
4. Convert to hours with N.

If the 6305 lives in a motor, the load is mostly radial. In a pump or conveyor, verify axial load against C₀ and the bearing's axial capacity.

## What speed and temperature can a 6305 bearing run?

**How fast can a 6305 bearing spin?** With a pressed steel cage, a 6305 reaches 14,000–15,000 RPM at oil. With a polymer cage and oil mist, 24,000–26,000 RPM is possible. Seal type matters.

- Open: highest speed.
- ZZ or 2Z: metal seal, lower friction.
- 2RS or 2RS1: contact seal, lowest leak but highest friction.
- Special grease or oil mist: higher speed.

**What is the temperature range?** Standard bearing steel with standard heat treatment: -30°C to +120°C continuous. For 250°C, specify high-temperature steel and clearance. For -40°C and below, confirm material and grease.

> Check the grease. A 6305 with a standard lithium complex grease typically reaches +120°C. For 150°C, use an high-temperature grease and confirm with the manufacturer.

## What tolerance and clearance options exist?

**What are the tolerances?** The bore tolerance for a 25 mm bearing per ISO 15:2017 is k5: 0 to +9 μm. Shaft tolerance for a 25 mm shaft is h6: 0 to -9 μm. Housing tolerance is H7. ABEC 1 corresponds to ISO P6, ABEC 3 to ISO P6, ABEC 5 to ISO P5, and ABEC 7 to ISO P4.

<table><thead><tr><th>Item</th><th>ABEC 1 / ISO P6</th><th>ABEC 3 / ISO P6</th><th>ABEC 5 / ISO P5</th><th>ABEC 7 / ISO P4</th></tr></thead><tbody><tr><td>Bore Δd</td><td>0 to +9 μm</td><td>0 to +9 μm</td><td>0 to +6 μm</td><td>0 to +5 μm</td></tr><tr><td>OD ΔD</td><td>0 to -9 μm</td><td>0 to -9 μm</td><td>0 to -6 μm</td><td>0 to -5 μm</td></tr><tr><td>Width ΔB</td><td>0 to -12 μm</td><td>0 to -12 μm</td><td>0 to -8 μm</td><td>0 to -5 μm</td></tr><tr><td>Contact angle</td><td>10–18°</td><td>10–18°</td><td>10–18°</td><td>10–18°</td></tr><tr><td>Surface roughness</td><td>0.2–0.4 μm Ra</td><td>0.2–0.4 μm Ra</td><td>0.2–0.4 μm Ra</td><td>0.2–0.4 μm Ra</td></tr></tbody></table>

**How do I choose clearance?** C3 is common for motors, gearboxes and pumps with shaft expansion or misalignment. C1 and C2 are lighter clearance. C4 or C5 are for high-temperature or high-speed cases.

## What materials, cages and seals are used?

**What materials?** Standard bearing steel is SAE 52100 / AISI 52100, with through-hardening at 58–62 HRC. Standard 6305 bearings are usually chrome steel (GCr15). High-temperature 6305 bearings use silicon nitride (Si₃N₄) balls for thermal stability.

- Cage: pressed steel for general use.
- Seals: open, ZZ, 2RS, 2RS1.
- Balls: chrome steel, silicon nitride.

**What seals exist?** 6305-ZZ uses metal non-contact shields. 6305-2RS uses contact rubber seals. 6305-2RS1 uses a contact lip seal. Specify the seal code in the 6305 bearing specification.

## What is a 6305 bearing used for?

**Where is a 6305 bearing used?** Common uses are:

- Electric motors and generators.
- Gearboxes and speed reducers.
- Agricultural machinery.
- Automotive wheels and auxiliary systems.
- Conveyors, pumps, fans, blowers.
- Wind turbines (main shaft, yaw, pitch, generator).

**What 6305 bearing should you choose?** Provide:

1. Bore, OD, width.
2. Load rating and rpm.
3. Temperature.
4. Lubrication.
5. Sealing.
6. Tolerance class.
7. Mounting.

A 6305-2RS works in wet pump environments. A 6305-ZZ works in dusty conveyors. A high-tolerance 6305 works in motors and machine tool spindles.

What is a 6305 bearing?

A 6305 bearing is a single-row deep groove ball bearing with a 25 mm bore, 62 mm OD and 17 mm width per ISO 15:2017. It is used in motors, gearboxes, pumps, conveyors, agricultural machinery and automotive applications.

What are the dimensions of a 6305 bearing?

25 mm bore, 62 mm OD, 17 mm width. F = 34 mm, E = 49 mm, r min = 1.0 mm, rs min = 1.0 mm, r1-2 min = 0.6 mm.

What is the load rating of a 6305 bearing?

In the 63 series, a 6305 typically has C = 22.4–23.5 kN and C₀ = 11.5–12.5 kN, depending on the manufacturer. Check the manufacturer's catalog.

How fast can a 6305 bearing spin?

A 6305 bearing can spin at 14,000–15,000 RPM with oil, and up to 24,000–26,000 RPM with oil mist and a polymer cage. The seal type affects speed.

What is the temperature range of a 6305 bearing?

Standard 6305 bearings run at -30°C to +120°C. High-temperature versions reach 250°C. Confirm steel, cage and grease with the manufacturer.

## How to read a 6305 bearing specification drawing

**What does a 6305 bearing drawing show?** Read:

1. Bore d = 25 mm.
2. OD D = 62 mm.
3. Width B = 17 mm.
4. Sealing and shielding.
5. Tolerance class.
6. Material and cage.
7. Lubrication.

A 6305 bearing specification should show the load, speed, temperature, tolerance and seal.

Share your drawing or application details at mshjzc.com for a 6305 bearing specification matched to your shaft, load, speed and lubrication.
