---
title: "6308 Bearing Size"
date: 2026-11-12
description: "The 6308 bearing size is 40 mm inner diameter (bore) × 90 mm outer diameter × 23 mm width, giving a compact envelope for shafts up to 80 mm diameter across moto..."
source: https://en.mshjzc.com/blog/58220.html
---

# 6308 Bearing Size

The 6308 bearing size is 40 mm inner diameter (bore) × 90 mm outer diameter × 23 mm width, giving a compact envelope for shafts up to 80 mm diameter across motors, gearboxes, pumps, conveyors and agricultural machinery.

According to ISO 15:2017, the 6308 is a medium-series metric radial bearing with a 40 mm bore, 90 mm OD and 23 mm width. The standard 6308 bearing size supports **41.5 kN** dynamic load and **32.0 kN** static load at **5,300 RPM** grease speed rating, making it a workhorse in industrial gearboxes and electric motors.

The 6308 bearing size is **40 × 90 × 23 mm** and weighs approximately 0.66 kg.

- Bore: 40 mm
- Outer diameter: 90 mm
- Width: 23 mm
- Dynamic load rating (C): 41.5 kN
- Static load rating (C0): 32.0 kN
- Limiting grease speed: 5,300 RPM
- Limiting oil speed: 6,300 RPM
- Weight: 0.66 kg
- Temperature range: **-30 °C to +120 °C**

Because 6308 bearing size follows ISO 15:2017, the same 40×90×23 mm envelope is shared by deep groove ball, angular contact, cylindrical roller, spherical roller and unsplit cylindrical roller variants. Always verify the exact suffix, clearance class (C3 is common in motor applications) and lubrication requirements against the OEM manual.

FAQ: 6308 bearing size parameters based on ISO 15:2017 and MS Bearings factory data 2024.

## 6308 bearing size and load capacity for industrial gearboxes

For industrial gearboxes, the 6308 bearing size provides **41.5 kN** dynamic load and **32.0 kN** static load at **5,300 RPM** grease speed. This capacity suits continuous conveyor drives and pump impellers where 40×90×23 mm bores are standard.

<table><thead><tr><th>Rating type</th><th>Value</th><th>Source</th><th>Typical application</th></tr></thead><tbody><tr><td>Dynamic load</td><td>41.5 kN</td><td>ISO 15:2017 / MS Bearings factory data</td><td>Gearbox output shaft</td></tr><tr><td>Static load</td><td>32.0 kN</td><td>ISO 15:2017 / MS Bearings factory data</td><td>Vertical pump</td></tr><tr><td>Grease speed limit</td><td>5,300 RPM</td><td>MS Bearings catalog</td><td>Motor</td></tr><tr><td>Oil speed limit</td><td>6,300 RPM</td><td>MS Bearings catalog</td><td>Machine tool spindle</td></tr><tr><td>Temperature range</td><td>-30 °C to +120 °C</td><td>MS Bearings rated data</td><td>Wind turbine auxiliary system</td></tr></tbody></table>

> For continuous operation above 5,000 RPM, consider oil lubrication and verify clearance. C3 clearance is recommended for electric motors with heat-expanding shafts.

Typical applications include: electric motors, gearboxes, agricultural machinery, automotive transmissions, conveyors, pumps and wind turbines.

## 6308 bearing size speed limits and temperature range explained

The 6308 bearing size is rated for **5,300 RPM** grease speed and **6,300 RPM** oil speed, with a temperature range of **-30 °C to +120 °C** under standard lubricant film.

- Grease lubrication: 5,300 RPM
- Oil lubrication: 6,300 RPM
- Operating temperature: -30 °C to +120 °C
- Standard clearance: CN
- Common upgrade: C3 for motor applications

> Running a 6308 at 5,000 RPM requires balancing, proper housing fits and adequate lubrication. C3 clearance prevents brinelling in motor bearings where shaft expansion can reduce internal clearance.

Backing data comes from MS Bearings factory tests and ISO 15:2017 boundary dimension definitions.

## 6308 bearing size applications across motors, gearboxes, pumps and conveyors

The 6308 bearing size appears in electric motors, gearboxes, pumps, conveyors and agricultural machinery. Engineers specify 40×90×23 mm for medium-duty loads requiring balanced radial and axial capacity.

- Electric motors: C3 clearance for rotor expansion.
- Gearboxes: high radial load with moderate axial load.
- Pumps: corrosion-resistant variants for chemical service.
- Conveyors: sealed bearings for dusty environments.
- Agricultural machinery: frequent washdown with grease.
- Wind turbines: auxiliary drive with low noise requirements.

> For washdown applications in food processing or agricultural machinery, choose a 6308 with rubber seals and external zinc coating to prevent debris ingress.

Real-world deployment: a 5.5 kW three-phase motor in a food processing line has logged over 18,000 hours with a sealed 6308, 40×90×23 mm, C3, grease-lubed bearing.

## 6308 bearing size vs 6208 and 6408 dimensions compared

Compare the 6308 bearing size with 6208 and 6408 to verify housing dimensions before ordering. The table below shows the ISO 15:2017 dimensions for the three sizes.

<table><thead><tr><th>Bearing size</th><th>Bore (mm)</th><th>OD (mm)</th><th>Width (mm)</th><th>Dynamic load (kN)</th><th>Grease speed (RPM)</th></tr></thead><tbody><tr><td>6208</td><td>40</td><td>80</td><td>18</td><td>32.0</td><td>6,300</td></tr><tr><td>**6308**</td><td>**40**</td><td>**90**</td><td>**23**</td><td>**41.5**</td><td>**5,300**</td></tr><tr><td>6408</td><td>40</td><td>100</td><td>26</td><td>49.0</td><td>5,000</td></tr></tbody></table>

Trade-off: higher load capacity requires a larger housing envelope. Select the smallest 6308 bearing size that meets torque and temperature requirements to minimize cost and weight.

If housing space is tight, a 6208 offers higher speed ratings at lower load; if shock loads dominate, a 6408 offers higher capacity.

## How to select the correct 6308 bearing size for OEM replacement

Confirm the OEM part number before buying. The 6308 bearing size (40×90×23 mm) is compatible with SKF, FAG, NSK, NTN, KOYO and NACHI 6308 references if the suffix matches.

1. Check the old part: stamp 6308, 6308 C3, or brand code.
2. Measure bore, OD and width with calipers; confirm against 40×90×23 mm.
3. Verify rotational direction: sealed 6308s are non-rotatable; open 6308s are rotatable.
4. Match suffix: C3 clearance for motors, C4 for high-temperature gearboxes.
5. Check lubrication: grease for 5,300 RPM; oil for 6,300 RPM.
6. Confirm the mounting: check housing bore tolerance and shaft fit.

> Using a 40×90×23 mm C3 6308 in an electric motor extends service life by 20–30% compared to CN clearance under heat-expanding shafts.

## Where to buy 6308 bearing size with factory-direct export support

Order 6308 bearing size from MS Bearings with ISO 9001:2015 certification, 24-hour shipping and 12-month warranty for industrial buyers. MOQ from 50 pieces; standard package 2–4 days, custom 5–7 days.

- Lead time: 2–4 days standard, 5–7 days custom.
- Warranty: 12 months.
- Certification: ISO 9001:2015.
- Payment: T/T, L/C at sight.
- Shipping: FOB Shanghai/Ningbo or EXW Kunshan.
- Markets: 30+ countries across North America, Europe, Southeast Asia and the Middle East.

> OEM engineers in North America and Europe frequently replace SKF, FAG and NSK 6308 with MS Bearings factory-direct equivalents at lower total cost without changing the 40×90×23 mm envelope.

Learn more about MS Bearings factory and specifications at **mshjzc.com**.

What is the 6308 bearing size?

The 6308 bearing size is 40 mm bore × 90 mm outer diameter × 23 mm width, weighing approximately 0.66 kg.

What is the load rating of the 6308 bearing?

The 6308 bearing handles 41.5 kN dynamic load and 32.0 kN static load according to ISO 15:2017.

What is the speed rating of the 6308 bearing?

The 6308 bearing has a grease speed rating of 5,300 RPM and an oil speed rating of 6,300 RPM, with a temperature range from -30 °C to +120 °C.

What applications use the 6308 bearing size?

The 6308 bearing size is used in electric motors, gearboxes, pumps, conveyors and agricultural machinery due to its balanced load capacity and compact dimensions.

How to select the correct 6308 bearing size for OEM replacement?

Confirm OEM part number and dimensions, verify rotational direction and clearance class, then match lubrication, housing bore and shaft fit.
