---
title: "Bearing Selection Guide"
type: category
description: "How to select the right bearing: dynamic and static load ratings, L10 life calculation, fitting tolerances, internal clearance, speed limits, preload and X/Y equivalent load factors explained."
source: https://en.mshjzc.com/bearing-selection-guide.html
---

# Bearing Selection Guide

How to select the right bearing: dynamic and static load ratings, L10 life calculation, fitting tolerances, internal clearance, speed limits, preload and X/Y equivalent load factors explained.

## Articles in this category

- [Cylindrical Roller Bearing N, NU, NJ, NUP, EJ Types Compared](https://en.mshjzc.com/bearing-selection-guide/58190.html): Cylindrical roller bearings come in N, NU, NJ, NUP, NH and N designations. Learn which rings have flanges and which dire...
- [Modified Rating Life: Reliability Factor a1 and aISO Explained](https://en.mshjzc.com/bearing-selection-guide/58185.html): Basic L10 assumes 90% reliability. Modified life Lnm uses a1 reliability factor and aISO for lubrication, contamination ...
- [Static Load Safety Factor S0: Avoiding Brinelling Under Shock Loads](https://en.mshjzc.com/bearing-selection-guide/58184.html): Static load safety factor S0 = C0/P0 guards against permanent brinelling under shock and stationary loads. Learn typical...
- [Self-Aligning Ball vs Spherical Roller Bearings: When to Use Which](https://en.mshjzc.com/bearing-selection-guide/58183.html): Self-aligning ball bearings and spherical roller bearings both compensate misalignment, but handle very different load l...
- [Deep Groove vs Angular Contact Ball Bearings: Which to Choose?](https://en.mshjzc.com/bearing-selection-guide/58182.html): Deep groove ball bearings handle mainly radial loads; angular contact handles combined radial and axial. Compare speed, ...
- [Angular Contact Bearing Arrangements: DB, DF, DT Preload Explained](https://en.mshjzc.com/bearing-selection-guide/58180.html): Angular contact ball bearings are mounted in DB (back-to-back), DF (face-to-face) and DT (tandem) sets. Learn preload GA...
- [Shaft and Housing Fits: g6, h6, k6, m6 Tolerance Chart](https://en.mshjzc.com/bearing-selection-guide/58179.html): Bearing mounting fits control ring rotation. Learn g6, h6, j6, k6, m6, n6 shaft fits and H7, J7, K7 housing fits for rot...
- [Bearing Life Calculation: L10 Worked Example Step by Step](https://en.mshjzc.com/bearing-selection-guide/58163.html): Full L10 life calculation example: choose a deep groove bearing for a 3 kW electric motor, check load, speed and require...
- [Equivalent Dynamic Load: How X and Y Factors Work](https://en.mshjzc.com/bearing-selection-guide/58144.html): Equivalent dynamic load P = XFr + YFa, load ratio Fa/C0, X and Y factors, how to convert combined radial and axial load ...
- [Bearing Materials and Heat Treatment: What Makes a Raceway Hard?](https://en.mshjzc.com/bearing-selection-guide/58143.html): Bearing steel types (chrome steel, stainless, through-hardened vs case-hardened), hardness HRC, heat treatment, ceramic ...
- [Bearing Seals and Shields: Which Protection Do You Need?](https://en.mshjzc.com/bearing-selection-guide/58142.html): Contact seals, non-contact shields, labyrinth seals, rubber material selection, grease retention vs contamination protec...
- [Bearing Arrangement: Fixed-Free, Back-to-Back and Tandem](https://en.mshjzc.com/bearing-selection-guide/58141.html): Fixed-floating bearing arrangement, X-O and O-X pairs, tandem sets, how to locate the shaft and allow thermal expansion.
- [Preload in Bearings: When It Helps and When It Hurts](https://en.mshjzc.com/bearing-selection-guide/58140.html): Bearing preload explained: why preload increases stiffness, light/medium/heavy classes, when to apply it, and the cost o...
- [Bearing Speed Limits: Grease and Oil Thermal Speed Explained](https://en.mshjzc.com/bearing-selection-guide/58139.html): Reference speed, thermal speed, limiting speed factors, grease vs oil lubrication speed ratings and how to de-rate beari...
- [Bearing Internal Clearance: C2, C0, C3, C4 and C5 Selection](https://en.mshjzc.com/bearing-selection-guide/58138.html): Internal radial clearance classes C2/C0/C3/C4/C5 explained, temperature differential, interference fit and how to choose...
- [Bearing Fitting Tolerances: Shaft and Housing Fits](https://en.mshjzc.com/bearing-selection-guide/58137.html): Shaft and housing tolerance selection, interference vs transition fits, which ring rotates, fit classes for rotating inn...
- [Dynamic vs Static Load Rating: C and C0 Explained](https://en.mshjzc.com/bearing-selection-guide/58136.html): Dynamic load rating C, static load rating C0, equivalent load P, L10 life formula and load factor basics for bearing sel...
