sales@cnprv.com

+86 15862366271 (WhatsApp/WeChat)

6304 Bearing Size: Dimensions, Load, and Clearance Guide

Home / Blogs / Info
MS Bearing WareHouse
author admin 12 November, 2026

A 6304 bearing size is defined by an inner diameter (bore) of 20 mm, an outer diameter of 50 mm, and a width of 17 mm. Per ISO 15:2017, these exact metric dimensions are universally standardized across all 6304 ball bearings, making them a widely machined dimension for industrial and automotive applications.

Because the 6304 designation indicates the dimensions rather than the internal rolling element geometry, OEMs and maintenance engineers frequently ask: which type of 6304 bearing is right for my application? The answer depends on your load type, speed, and mounting requirements. MS Bearings manufactures and exports 6304 configurations across multiple product families to cover these engineering needs globally.

6304 Bearing Dimensions Explained

The core 6304 bearing size specification is strictly standardized. When sourcing this part number from any certified factory, the physical dimensions must match the following measurements.

DimensionMetric (mm)Inch (approx.)
Inner Diameter (d)200.7874
Outer Diameter (D)501.9685
Width (B)170.6693
Inner Ring Width (b)180.7087
Outer Ring Width (c)150.5906
Fillet Radius (r min.)1.00.0394
  • Radial clearance is typically grouped into C3, C4, or CN ratings depending on the operating temperature of the machinery.
  • The 20 mm bore fits standard shafts manufactured to h6 tolerance.

6304 Bearing Cross-References and Types

The 6304 stamp is shared by several internal geometries. OEM engineers must select the right 6304 bearing size and type to prevent premature wear.

  • Deep Groove Ball Bearing: The most common 6304 type. It handles radial loads, axial loads in both directions, and high-speed applications like electric motors, pumps, and conveyors.
  • Angular Contact Ball Bearing: Designed for combined radial and one-direction axial loads. Commonly found in automotive wheel hubs, gearboxes, and machine tool spindles.
  • Cylindrical Roller Bearing: Handles very high radial loads. Used in heavy-duty industrial machinery, conveyors, and wind turbines where space is limited to the 20x50x17 mm envelope.

Load Capacity and Speed Ratings for 6304 Bearings

What are the load and speed limits for a 6304 bearing? Load capacities depend heavily on the internal construction. The following baseline data reflects standard 6304 deep groove ball bearings per MS Bearings factory data 2024.

RatingDeep Groove Ball (6304)Angular Contact (6304)Cylindrical Roller (NU304)
Dynamic Load (C)15.0 kN13.2 kN28.0 kN
Static Load (C0)6.5 kN8.0 kN22.5 kN
Max RPM (Grease)13,00011,0009,000
Max RPM (Oil)16,00014,00012,000
Always calculate the dynamic load rating against your actual application's service factor. Machines subject to vibration, such as agricultural machinery, require a higher safety factor than steady-state conveyors.

Industrial Applications for 20x50x17 mm Bearings

The standard 6304 bearing size is engineered into a wide variety of commercial and industrial machinery. Where is a 20x50x17 mm bearing typically installed?

  1. Electric Motors: The primary use case for 6304 bearings. The 20x50x17 mm envelope fits the shaft of most 1 HP to 5 HP electric motors.
  2. Automotive Transmissions: Angular contact variants support wheel hubs, alternators, and water pumps requiring precise axial positioning.
  3. Agricultural Machinery: Cyclinder roller types with C3 clearance resist heavy radial impact loads found in tractors and harvesters.
  4. Pumps and Compressors: Deep groove variants are ideal for centrifugal pumps requiring quiet, continuous rotation up to 16,000 RPM.
  5. Wind Turbines: Cylindrical roller types handle heavy radial loads in the pitch control mechanisms of wind turbines.

How to Select the Right 6304 Bearing

How to select the right 6304 bearing type? Follow these steps:

  1. Measure the shaft and housing to confirm the bore is exactly 20 mm and the housing is 50 mm.
  2. Identify the load type. Pure radial loads suit cylindrical roller bearings, while combined loads require angular contact or deep groove designs.
  3. Calculate the rotational speed and compare it to the bearing's dynamic limit to prevent premature fatigue.
  4. Select a clearance group. Use C3 for slightly loose fits or high-temperature operations.

What is the exact size of a 6304 bearing?

The 6304 bearing size is precisely 20 mm in inner diameter, 50 mm in outer diameter, and 17 mm in width.

What type of bearing is a 6304?

The 6304 marking can refer to deep groove ball bearings, angular contact bearings, or cylindrical roller bearings sharing the same dimensions.

Can a 6304 bearing handle high speeds?

Yes, a 6304 deep groove ball bearing can operate up to 16,000 RPM in oil lubrication environments.

Which applications use a 20x50x17 mm bearing?

Typical applications include electric motors, automotive transmissions, agricultural machinery, pumps, and conveyors.

Where can I source a certified 6304 bearing?

MS Bearings supplies factory-direct 6304 bearings that meet ISO 15:2017 standards, certified with ISO 9001:2015 and backed by a 12-month warranty.

For engineered replacements of SKF, FAG, or NSK part numbers, contact the technical team at MS Bearings to request 6304 factory data sheets.