sales@cnprv.com

+86 15862366271 (WhatsApp/WeChat)

medical equipment angular contact bearing

Home / Blogs / Info
MS Bearing WareHouse
author admin 15 November, 2026

Where Medical Equipment Angular Contact Bearings Are Used

  • CT and MRI rotating gantries: CT gantry rotation speed is typically 0.5–2 rpm, but it requires high positioning accuracy and low noise; MRI requires low magnetic permeability and low eddy current loss.
  • Operating room ceiling lifts and surgical robot joints: they require precise positioning, smooth operation, and low noise, typically P4 or P5 precision.
  • Dental chair and diagnostic bed lifts: they require smooth, quiet operation, typically P6 precision and phenolic resin cage.
  • Medical centrifuges and cleanroom transport: they require high cleanliness and corrosion resistance.
  • Ultrasound probes and surgical instruments: they require low magnetic permeability and low noise.

How to Select a Medical Equipment Angular Contact Bearing

Parameter Typical Range Notes
Contact angle 15°, 25°, 40° 15° for high-speed, low-load; 25° for general load; 40° for heavy axial load
Precision grade P6, P5, P4 Per ISO 15:2017; P4 for surgical robots and CT gantries, P6 for dental chairs
Sealing form Open, sealed, shielded Sealed for sterilization environments; open for high-speed with oil lubrication
Cage material Phenolic resin, nylon POM Phenolic resin for high temperature and low noise; nylon for light load and low cost
Clearance C3, C4 C3 for general; C4 for high-speed or precision positioning
  1. Calculate the required radial and axial load capacity based on the equipment weight and motion profile.
  2. Determine the required rotational speed and torque; check the grease life per SKF 2024 catalog formulas.
  3. Select the tolerance grade and sealing form based on the sterilization environment and cleanliness requirements.
  4. Select the cage material based on the temperature range and noise requirements.
  5. Verify the bearing bore size and housing dimensions per ISO 15:2017.
For CT gantry applications, select P4 precision, C3 clearance, sealed form, and phenolic resin cage to ensure quiet operation and long service life in sterilization environments.

How to Lubricate Medical Equipment Angular Contact Bearings

  • Grease lubrication is the most common method; per SKF 2024 catalog, the grease life formula is Lnm = a × (C/P)^p × (n/n0)^q × 10^-6 hours, where a is the life adjustment factor, C is the dynamic load rating, P is the equivalent load, n is the rotational speed, and p and q are exponents. For example, at 1,000 rpm and a load ratio of 0.1, the L10 life is typically 20,000 hours.
  • Standard grease temperature range is -20°C to 120°C; high-temperature grease is required for sterilization environments up to 150°C.
  • Oil lubrication is used for high-speed applications such as dental chair lifts and surgical robot joints; oil viscosity should be selected per the operating temperature and speed.
  • Re-lubrication interval is typically every 5,000 to 10,000 hours; use the same grease or a compatible one.
  • Clean the bearing and housing thoroughly before lubrication to remove residual grease and debris.
For medical equipment that undergoes repeated autoclave sterilization, select high-temperature grease with a temperature range of -30°C to 150°C and a re-lubrication interval of 5,000 hours.

How to Diagnose Medical Equipment Angular Contact Bearing Failure

  1. Listen for abnormal noise; normal noise is typically 50–60 dB(A), and exceeding 70 dB(A) indicates bearing damage or lubrication failure.
  2. Measure the bearing temperature; normal temperature rise is 20–30 K above ambient, and exceeding 40 K indicates excessive load or poor lubrication.
  3. Check the vibration; normal vibration is 0.5–2 mm/s, and exceeding 4 mm/s indicates bearing damage or misalignment.
  4. Inspect the rotational torque; excessive torque indicates sealing friction or inadequate lubrication.