sales@cnprv.com

+86 15862366271 (WhatsApp/WeChat)

Cylindrical Roller Bearings: N/NU/NJ/NUP Series Explained

Home / Bearing Basics / Info
MS Bearing WareHouse
author admin 09 November, 2026

Cylindrical roller bearings use cylindrical rollers as the rolling elements, running in line contact with the raceways. This gives them significantly higher radial load capacity than ball bearings of the same boundary dimensions. They are the workhorse of heavy industry: gearboxes, large electric motors, rolling mills, railway axleboxes and traction motors all rely on them.

See also our rolling bearing basics guide and deep groove ball bearing reference.

Why Line Contact Matters

Ball bearings operate on point contact, which means high stress at a small contact patch. Cylindrical rollers spread the load over a line, reducing contact stress and allowing the bearing to carry 1.5 to 3 times more radial load for the same bore size. The trade-off is lower speed capability and no ability to carry significant axial load on their own.

Bearing Series Codes and Separability

Cylindrical roller bearings are classified by which rings have flanges (guide ribs for the rollers). The code letter tells you how the bearing can be mounted and what axial movement it allows:

N Series (Outer Ring Without Flanges)

The outer ring has no flanges; the inner ring has two flanges and holds the cage and rollers as a unit. The outer ring can float axially. This is a pure floating bearing that allows shaft expansion in the housing.

NU Series (Inner Ring Without Flanges)

The inner ring has no flanges; the outer ring has two flanges. The rollers and cage stay with the outer ring. The inner ring can slide axially. NU is the most common floating-bearing arrangement in gearboxes and motors.

NJ Series (Inner Ring With One Flange)

The outer ring has two flanges; the inner ring has one flange. This allows axial location in one direction. When paired with an HJ angle ring, it can locate in both directions, effectively creating a fixed bearing.

NUP Series (Inner Ring With Two Flanges Plus a Washer)

The inner ring has one fixed flange plus a loose locking washer on the other side. This provides true axial location in both directions while allowing the inner ring and outer ring to be assembled separately. NUP bearings are used as the fixed bearing in a fixed-floating arrangement.

NN and NNU Series (Double Row)

Double-row cylindrical roller bearings offer even higher radial rigidity and precision. NN series have two inner rings and a double outer ring; NNU series reverse this. They are common in machine tool spindles and large gearboxes.

E and EC Designations

The E or EC suffix indicates an optimized internal design: larger rollers, more rollers, improved cage geometry. These bearings carry up to 30% more radial load than the standard (non-E) version without changing boundary dimensions. When replacing an older bearing, always specify the E version if available.

Cage Materials

  • Pressed steel cage (J) - standard, good for general industrial use up to medium speeds
  • Machined brass cage (M) - heavy load, shock load, higher temperature, common in rolling mills
  • Polyamide cage (TVP) - high speed, low noise, lighter weight, limited temperature range

Typical Applications

  • Industrial gearboxes and speed reducers (NU floating + NUP fixed)
  • Large electric motors and generators
  • Railway traction motors and axleboxes
  • Paper machine rolls and printing cylinders
  • Crane hook and sheave assemblies
  • Centrifugal and axial compressors

Frequently Asked Questions

Can a cylindrical roller bearing carry axial load?

Only a small amount. N and NU series cannot carry axial load at all - the rings slide freely. NJ and NUP series can carry axial load in one or both directions, but this is limited and should not be the primary load direction. For high axial load, add a separate thrust bearing.

What does "floating bearing" mean?

In a fixed-floating arrangement, one bearing (usually NU or N) locates the shaft radially but allows axial movement so thermal expansion of the shaft does not induce binding. The other bearing (NUP or NJ+HJ) fixes the shaft axially.

Are cylindrical roller bearings better than deep groove ball bearings?

For pure radial load at moderate speed, cylindrical rollers carry more load. For combined radial and axial load at high speed, deep groove or angular contact ball bearings are better. The choice depends on the load vector, not just magnitude.

Related Reading

Need Cylindrical Roller Bearings?

MS Bearing supplies N, NU, NJ, NUP and NN series in standard and E-optimized designs, with steel, brass or polyamide cages. All units are dimensionally interchangeable with major brands and CE certified. Send us your load and speed data, and we will recommend the correct series and cage material for your machine.