sales@cnprv.com

+86 15862366271 (WhatsApp/WeChat)

Spherical Roller Bearings: Self-Aligning Performance for Heavy Loads

Home / Bearing Basics / Info
MS Bearing WareHouse
author admin 09 November, 2026

Spherical roller bearings are double-row, self-aligning bearings designed for the harshest industrial environments. They combine very high radial load capacity, moderate axial load capacity, and the ability to tolerate shaft misalignment and deflection. When a gear shaft bends under load or the housing is not perfectly aligned, spherical roller bearings keep running where other bearing types would fail.

For the broader bearing family overview, see our rolling bearing basics guide.

How the Self-Aligning Geometry Works

The outer ring raceway is a spherical surface with its center at the bearing axis. The inner ring has two inclined raceways, and the barrel-shaped rollers roll between them. Because the outer raceway is spherical, the inner ring and roller set can tilt slightly relative to the outer ring without binding.

This angular misalignment capability, typically up to 1 to 2 degrees, compensates for:

  • Shaft deflection under heavy load
  • Housing machining errors or assembly misalignment
  • Shaft thermal expansion that tilts the bearing position
  • Mounting misalignment in large equipment

No other roller bearing type offers this combination of heavy load and misalignment tolerance.

Two Row Designs and Lubrication

Basic Design (CA, CAK)

The standard design uses a machined brass cage guiding the rollers. It is suitable for normal radial and axial combined loads. The K suffix indicates a tapered bore (1:12 taper) for mounting on adapter sleeves or withdrawal sleeves.

Symmetrical Rollers (CC, CCM)

The modern CC design uses two stamped steel cages and symmetrical rollers that self-guide on the center guide ring. This design reduces friction, allows higher speed, and improves roller load distribution. It is the most common modern design for new equipment.

Sealed Design (2CS / 2CS5)

Sealed spherical roller bearings are greased for life at the factory and fitted with contact seals on both sides. They eliminate relubrication maintenance and are ideal for conveyor rolls, fans and pulleys where re-greasing is difficult. The seals also block dust and water contamination.

Bore Types

  • Cylindrical bore (basic number) - press fit directly onto the shaft
  • Tapered bore K (1:12 taper) - mounts on adapter sleeve (H series) or withdrawal sleeve (AH series), allowing easy axial location on stepped shafts

Load Capacity and Speed

Spherical roller bearings have very high dynamic load ratings, often 2 to 3 times that of deep groove ball bearings of the same bore. They carry combined radial and axial loads in either direction, though the axial component should not exceed 20% of the radial load. Speed capability is moderate - lower than ball bearings but adequate for most industrial machinery.

Typical Applications

  • Mining screens, crushers and conveyor pulleys
  • Cement mills and rotary kilns
  • Paper machine dryer rolls and calendar rolls
  • Marine propulsion shafts and rudder stocks
  • Large industrial fans and ventilators
  • Agricultural harvesters and tillage equipment
  • Wind turbine main shafts and gearboxes

Frequently Asked Questions

What is the maximum misalignment a spherical roller bearing can tolerate?

Typically 0.5 to 1.5 degrees, depending on the series and load. Beyond this range, roller edge loading causes localized stress and early failure.

What does the K suffix mean?

K means a 1:12 tapered bore. It is designed to fit onto an adapter sleeve (H3000, H3100 series) which slides over a plain shaft. This allows easy mounting and axial position adjustment without a stepped shaft.

Are sealed spherical roller bearings relubricatable?

Sealed (2CS) units are generally grease-for-life and should not be relubricated. Open and sealed-with-groove (W33) designs have annular grooves and lubrication holes in the outer ring for periodic relubrication.

Related Reading

Need Spherical Roller Bearings?

MS Bearing supplies 22200, 22300, 23000, 23100, 23200, 24000 and 24100 series in open, sealed and tapered-bore variants. Adapter and withdrawal sleeves are available. All bearings are CE certified, dimensionally interchangeable, and shipped worldwide. Send us your operating conditions - load, speed, temperature and misalignment - and our engineers will recommend the correct series and clearance class.