sales@cnprv.com

+86 15862366271 (WhatsApp/WeChat)

16000 Series Bearing Dimensions

Home / Blogs / Info
MS Bearing WareHouse
author admin 09 November, 2026

16000 series bearing dimensions refer to the standardized inner diameter, outer diameter, and width of metric rolling bearings built on a 16 mm bore baseline, governed by ISO 15:2017. The 16000 series covers a family of bearings whose bore size starts at 16 mm and scales up through standard metric increments (16 mm, 17 mm, 18 mm, up to 80 mm), spanning deep groove ball, angular contact, tapered roller, cylindrical roller, and thrust bearing designs. Whether you are sourcing a 6016, 6216, or NU216, the defining feature is the 16 mm inner bore. Per ISO 15:2017, the dimensional boundaries for these bearings are strictly regulated. For example, a standard 6016 deep groove ball bearing measures 80 mm in outer diameter (D), 125 mm in width (B), and houses a 16 mm inner diameter (d). A 6216 wide-series bearing increases the outer diameter to 140 mm while maintaining the 16 mm bore. When evaluating 16000 series bearing dimensions, always verify the specific width, as it dictates the housing and shaft shoulder spacing. In production, MS Bearings factory data 2024 confirms that maintaining bore roundness within 5 microns during machining is critical for proper internal clearance and load distribution across rollers or balls.

16000 Series Bearing Dimensions Chart

To compare 16000 series bearing dimensions accurately, review the metric designations and standardized sizes for common configurations. The table below outlines standard light, medium, and heavy width variants sharing the 16 mm bore.

DesignationBore (d)Outer Diameter (D)Width (B)Basic Dynamic Load Rating (C)
601680 mm125 mm22 mm45.5 kN
621680 mm140 mm26 mm72.0 kN
631680 mm170 mm39 mm122.0 kN
NU21680 mm140 mm26 mm108.0 kN
3021680 mm140 mm26 mm130.0 kN

These dimensions represent standard metric sizes found across global OEM specifications. A 6016 deep groove ball bearing features a 125 mm outer diameter, while a 6316 features a 170 mm outer diameter. The wider the width (B), the higher the load capacity, but it requires more radial space.

Bore and Outer Diameter Tolerances

Standard tolerances for 16000 series bearing dimensions (which encompasses normal tolerances for both the 16 mm bore and the corresponding outer diameter) are strictly controlled per ISO 15:2017. The average deviation (Δdmp) for a 16 mm bore in standard tolerance is 0 to -8 μm. The outer diameter variation (ΔDmp) for dimensions under 180 mm (such as the 125 mm or 140 mm sizes in the 16000 series) is typically +9 μm. This precision ensures smooth mounting on shafts and fit into housings. For high-speed applications exceeding 5,000 RPM, operating temperatures reaching 150 °C, or applications requiring extremely low noise, upgrade to P5 or P4 tolerance classes where the bore tolerance shrinks to -5 μm.

Radial Clearance and Fit

Radial clearance defines the internal play between rolling elements and raceways, which is calculated based on the specific 16000 series bearing dimensions. Standard 16000 series bearings often come with CN (Normal) clearance by default, suitable for motors and pumps. For electric vehicles or machine tool spindles generating extreme heat, request C3 clearance (typically 13 μm to 28 μm for these bore sizes) to prevent binding during thermal expansion.

Check clearance: Always measure clearance using a dial indicator. If radial clearance drops below 10 μm after mounting an interference fit, the bearing may seize.

Applications Using 16000 Series Dimensions

  • Electric Motors: 16 mm bore bearings (e.g., 6216) handle dynamic radial loads in 15 kW to 30 kW motors.
  • Automotive Gearboxes: Tapered roller 30216 bearings manage combined loads due to their optimized width and roller geometry.
  • Agricultural Machinery: Cylindrical roller NU216 bearings handle heavy radial forces in harvesters operating under high vibration.
  • Conveyors: Deep groove 6016 bearings guide conveyor belts, requiring precise 16 mm shaft fits.
  • Wind Turbines: Large diameter bearings requiring an 80 mm bore use 6316 dimensions for heavy load transfer.
  • Centrifugal Pumps: P4 tolerance 6216 bearings maintain alignment in fluid handling systems.

Buying Guide for 16000 Series Bearing Dimensions

When buying 16000 series bearings, prioritize ISO 15:2017 compliance and consistent dimension tolerances. Evaluate suppliers by reviewing dimensional inspection certificates.

  1. Verify supplier certifications: ISO 9001:2015.
  2. Request C3 clearance or P5 tolerance options for high-speed or hot applications.
  3. Confirm application environments: specify temperature, speed, and load profiles.
  4. Check MOQ: Standard MOQ is 100 pieces.
  5. Negotiate lead times: standard dispatch is 24–72 hours for in-stock 16000 series items.

Send your OEM drawings to MS Bearings for direct factory quotes on 16000 series bearings and heavy-duty variants. At MS Bearings, we provide OEM replacements for SKF, FAG, and NSK, with 12-month quality guarantees and direct factory supply.

How to measure 16000 series bearing dimensions?

Measure the inner diameter with a calibrated micrometer, and outer diameter and width with a caliper. Cross-reference with ISO 15:2017 charts (e.g., 80 mm bore, 125 mm outer, 22 mm width for a 6016).

What is the standard clearance of a 16000 series bearing?

Standard CN clearance is 10 to 20 μm for light and medium 16000 series. Upgrade to C3 (13–28 μm) for high-temperature applications.

Can I get a custom width for a 16000 series bearing?

Custom widths (e.g., 6216 dimensions altered) require a minimum order of 500 pieces. Contact us for engineering drawings and pricing.

What are typical max operating speeds for 16000 series bearings?

Standard 6016 bearings reach 10,000 RPM. With P5 tolerance and ceramic balls, 15,000 RPM is possible.