The 6205 bearing dimensions per ISO 15:2017 standard are 25 mm inner diameter (bore), 52 mm outer diameter (OD), and 15 mm width. This compact deep groove ball bearing supports radial loads up to 14.0 kN and axial loads up to 6.95 kN at 12,000 RPM.
Understanding these specifications is critical for OEM designers replacing bearings in electric motors, conveyor systems, or agricultural machinery. The 6205-2Z SKF variant offers identical dimensions with metal shields for contamination protection.
6205 Bearing Dimensional Parameters
| Parameter | 6205-2RS | 6205-2Z | Tolerance Class |
|---|---|---|---|
| Inner Diameter (d) | 25 mm ±0.006 | 25 mm ±0.006 | P5 |
| Outer Diameter (D) | 52 mm ±0.011 | 52 mm ±0.011 | P5 |
| Width (B) | 15 mm ±0.008 | 15 mm ±0.008 | P5 |
| Dynamic Load Capacity (C) | 14.0 kN | 14.0 kN | Per ISO 281:2007 |
| Static Load Capacity (C₀) | 6.95 kN | 6.95 kN | Per ISO 76:2006 |
- Cage material: Polyamide nylon for low noise applications
- Seal types: 2RS (rubber) vs 2Z (metal) for IP65/IP69K ratings
- Temperature range: -30°C to +120°C continuous operation
⚠️ Note: Exceeding radial load beyond 14 kN may cause premature fatigue failure in high-vibration environments.
Material & Tolerance Standards
The 6205 bearing uses GCr15 bearing steel per ISO 683-1:2017 with through-hardening at 60-62 HRC. Radial clearance is controlled per ABMA 9:1989 standards:
- Group 1 (C1): 9-20 μm for precision applications
- Group 2 (C2): 13-28 μm for general machinery
- Group 3 (C3): 18-36 μm for electric motors
Mounting & Application Guidelines
For proper installation, maintain 0.005-0.010 mm shaft tolerance (k5) and housing tolerance (H7). Use grease with NLGI 2 consistency for 8,000-10,000 operating hours.
🔧 Maintenance Tip: Monitor vibration levels exceeding 4.5 mm/s (ISO 10816-3) to prevent unexpected downtime.
Comparative Analysis with Similar Bearings
| Bearing Type | Bore (mm) | OD (mm) | Width (mm) | Max RPM |
|---|---|---|---|---|
| 6205 | 25 | 52 | 15 | 12,000 |
| 6204 | 20 | 47 | 14 | 13,000 |
| 6305 | 25 | 62 | 17 | 10,000 |
- 6205 vs 6204: 25% larger load capacity but 12% higher weight
- 6205 vs 6305: 15% wider profile for heavy-duty applications
What is the standard tolerance for 6205 bearing dimensions?
Per ISO 15:2017, 6205 bearings have k5 shaft tolerance (±0.009 mm) and H7 housing tolerance (±0.015 mm) for proper mounting.
Can 6205 bearings operate at 15,000 RPM?
No, maximum recommended speed is 12,000 RPM with grease lubrication. Higher speeds require special cage designs and oil lubrication.
How much weight can a 6205 bearing support?
Static load capacity reaches 6.95 kN (708 kgf) with C0 rating. Dynamic load capacity is 14.0 kN (1,427 kgf) under ISO 281:2007 standards.
For OEM specifications or technical consultation on 6205 bearing dimensions, contact MS Bearings at mshjzc.com. Our ISO 9001:2015 certified factory provides factory-direct exports to 30+ countries with 24-hour shipment for standard sizes.
