sales@cnprv.com

+86 15862366271 (WhatsApp/WeChat)

6205 Bearing Size

Home / Blogs / Info
MS Bearing WareHouse
author admin 11 November, 2026

What is the 6205 bearing size? The 6205 bearing measures 25 mm bore × 52 mm outer diameter × 15 mm width per ISO 15:2017, and it is one of the most widely specified rolling bearings for motors, gearboxes, pumps, and conveyors. Its 25 mm bore matches the common 50 mm shaft diameter class, and the 52 mm outer diameter fits tightly into NEMA 56C-face motor housings and standard pillow blocks. Most 6205 bearings in the current market are deep-groove ball bearings, but the 6205 designation by itself only fixes the dimensions. Bearing type, sealing, clearance, and tolerance are separately specified on the purchase order. This guide covers dimensions, tolerances, load and speed limits, material options, and sourcing for the 6205 bearing size.

What are the dimensions of a 6205 bearing size?

The 6205 is defined by three core dimensions, measured in millimetres:

ParameterValue (mm)Standard reference
Bore diameter (d)25ISO 15:2017
Outside diameter (D)52ISO 15:2017
Width (B)15ISO 15:2017
Assembly radius r (min.)1.0ISO 15:2017

From these three dimensions, manufacturers compute the load ratings. Per MS Bearings factory data 2024, a standard 6205-2RS deep-groove ball bearing achieves:

  • Dynamic load rating C: 14.0 kN
  • Static load capacity C0: 6.95 kN
  • Fatigue load limit Cu: 0.63 kN
  • Reference speed: 14,000 r/min
  • Limiting speed: 8,500 r/min
  • Calculation coefficient f0: 14.4

Engineering tip: If the housing bore on your drawing reads 52 mm but the mating part is machined in inches, 52 mm = 2.047 in, so check that the housing bore is not dimensioned as 2.000 in. A 2-inch housing takes a 50 mm outer diameter bearing, not a 52 mm one.

What tolerance class applies to the 6205 bearing size?

Which tolerance class applies to the 6205 bearing size? Most 6205 bearings ship in P0 (also called ABEC 1) per ISO 492:2014, but P6 (ABEC 3) and P5 (ABEC 7) are available for spindle and high-speed applications. The tolerance class directly affects radial clearance and running noise, so it must be specified on every purchase order. For a 6205 bearing, P0 radial clearance typically falls between 5 and 15 micrometers, while P6 tightens this to 4–12 micrometers and P5 to 3–8 micrometers.

Common tolerance indicators for the 6205 bearing size:

  • P0 / ABEC 1: standard motors, pumps, fans, conveyors, and general agricultural machinery; radial clearance roughly 5–15 µm
  • P6 / ABEC 3: machine tool spindles, electric motors above 3000 rpm, and gearboxes with precision requirements; radial clearance roughly 4–12 µm
  • P5 / ABEC 7: high-speed precision spindles and servo motors; radial clearance roughly 3–8 µm

If the bearing bore is machined undersized by even 0.01 mm, the fitting interference can exceed 0.02 mm at 25 mm bore, which will reduce radial clearance and raise vibration. Always verify the tolerance class in the purchase order.

What is the weight of a 6205 bearing size?

How heavy is a 6205 bearing size? A standard 6205 bearing weighs about 0.2 kg, which affects both the structural design of the housing and the shipping cost. The actual weight varies by type, sealing, and retained cage. For example, a 6205-2Z deep-groove ball bearing with a steel cage and metal shields weighs about 0.20 kg, a 6205-2RS with contact rubber seals runs about 0.21 kg, and 6205ZZ, 6205 2RS, and 6205 2Z versions all stay within the same range. For an aluminium housing in the same pillow block, the bearing self-weight is not the dominant load, but for lightweight housings or remote conveyors, the mass of the bearing and its locking nut must be counted in the structure.

Weight data for common variants:

  • 6205-2RS with contact rubber seals: about 0.21 kg
  • 6205ZZ / 6205-2Z with metal shields: about 0.20 kg
  • Polymer-cage versions: about 0.18–0.20 kg, and slightly lower with reduced friction

For high-volume sourcing, if the price is quoted per kg, the difference between 0.18 kg and 0.21 kg can shift the cost structure, so confirm the weight specification with the supplier.

What are the application scenarios of the 6205 bearing size?

Where is the 6205 bearing size commonly used? The 6205 bearing size is widely used in electric motors, gearboxes, pumps, conveyors, and agricultural machinery, covering most general industrial transmission scenarios.

  • Electric motors: 50 mm shaft diameter motors, NEMA 56C-face motors, IEC 90 face motors, and standard motors from 5 to 15 kW
  • Gearboxes: planetary gearboxes, worm gearboxes, and reduction gearboxes for conveyors
  • Pumps: end-suction water pumps, centrifugal pumps, and chemical pumps
  • Conveyors: belt conveyors, chain conveyors, and roller tables
  • Agricultural machinery: rotary tillers, harvester transmissions, and irrigation systems

In electric motors, a 6205 bearing is usually matched with 6205-2RS or 6205-2Z depending on sealing and grease retention, and a second 6205 is often fitted at the opposite end to form a tandem arrangement.

How to choose a 6205 bearing size?

How should you choose a 6205 bearing size? First confirm that the bore diameter of 25 mm is locked by the shaft, then select the type, sealing, clearance, and tolerance class according to load and speed.

  1. Confirm the bore diameter: 25 mm is a hard dimension; the shaft diameter must match this and be machined with appropriate tolerances for the chosen fit class
  2. Choose the type: 6205 is most common as a deep-groove ball bearing, but for heavy radial loads a cylindrical roller version can be selected; for combined loads a tapered roller version is an option
  3. Choose sealing: 6205-2RS for dust and water environments, 6205-2Z for moderate protection, and open types for high-speed grease systems
  4. Choose tolerance class: P0 for general uses, P6 for spindle and precision gearboxes, and P5 for servo motors
  5. Check speed and temperature limits: do not exceed the reference speed, and confirm the grease temperature range meets the operating environment
  6. Evaluate OEM fit and lead time: align the grease and sealing parameters with the OEM's requirements, and reserve sufficient lead time for mass production

What are the common materials and protection types for the 6205 bearing size?

What are the common materials and sealing types for the 6205 bearing size? Bearings are mainly made from bearing steel, with sealing options including metal shields, contact rubber seals, and open types, and materials can be tailored to corrosion, high-temperature, or insulation requirements.

  • GCr15 bearing steel: standard material with HRC 58–62 hardness and high load capacity
  • 440C stainless steel: for food processing, chemical conveyors, and damp or corrosive environments
  • Ceramic hybrid balls: for insulating motors, high-speed electric motors, and electrically sensitive applications
  • 6205-2RS with contact rubber seals: IP68 protection, suitable for wet and dusty environments
  • 6205-2Z with metal shields: IP60 protection, suitable for moderate environments and high-speed applications

The most common sealing choice in industrial use is 6205-2RS with contact rubber seals, offering IP68 sealing, but if the operating temperature exceeds 80 °C, the rubber material becomes a limiting factor.

Where to buy the 6205 bearing size?

Where can you buy a 6205 bearing size? The 6205 bearing size is available from local distributors and industrial supply platforms, and OEMs can purchase directly from the factory. Purchasing directly from the factory shortens the lead time and stabilises bulk pricing.

  • MS Bearings: direct factory supply, 12-month warranty, ISO 9001:2015, 24-hour shipping, and export to over 30 countries
  • Local distributors: suitable for small-batch emergency purchases, but MOQ is often higher and prices vary with inventory
  • Industrial supply platforms: suitable for spot purchases, but confirm the authenticity of the original package and return policies

For OEMs, MS Bearings can supply bulk 6205 bearings with custom packaging and labels, and factory inspection reports can be provided for each batch.

FAQ

How much weight can a 6205 bearing size support?

A standard 6205-2RS deep-groove ball bearing has a dynamic load rating of 14.0 kN and a static load capacity of 6.95 kN, which can support a basic dynamic load of about 1.4 tons and a static load of about 0.7 tons.

What is the maximum speed of a 6205 bearing size?

Per MS Bearings factory data 2024, a standard 6205-2RS has a reference speed of 14,000 r/min and a limiting speed of 8,500 r/min. When selecting, leave a 20% safety margin, and use grease or oil lubrication according to the actual operating temperature.

What is the inner diameter of a 6205 bearing size?

The inner diameter of a 6205 bearing is 25 mm, and the outer diameter is 52 mm. The width is 15 mm, and the width deviation for standard tolerances is within ±0.2 mm, so this must be checked against the housing dimensions when designing the fit.

What are the load rating and clearance of a 6205 bearing size?

The standard 6205-2RS has a dynamic load rating of 14.0 kN and a static load capacity of 6.95 kN, with a fatigue load limit of 0.63 kN. Radial clearance is between 10 and 20 micrometers.

The 6205 bearing size is a critical choice for motors, gearboxes, pumps, conveyors, and agricultural machinery. When purchasing, confirm the bore diameter, outer diameter, and width as a set, and align type, sealing, clearance, tolerance, and material with the operating conditions. Contact MS Bearings at mshjzc.com to request specifications, drawings, and factory lead times.