Standard 6208 Bearing Dimensions Across Bearing Types
Every 6208 bearing from MS Bearings conforms to ISO 15:2017 and DIN 625-1 geometric standards, regardless of internal construction. The table below lists verified dimensions and load ratings for the three most common variants:
| Bearing Type | ID (mm) | OD (mm) | Width (mm) | Basic Load Rating C (kN) | Reference (Static) Rating C0 (kN) | Permitted Speed (grease, r/min) |
|---|---|---|---|---|---|---|
| Deep groove ball 6208 | 40 | 80 | 18 | 36.6 | 16.4 | 8,500 |
| Angular contact 6208 | 40 | 80 | 18 | 35.2 | 15.8 | 8,000 |
| Ceramic hybrid 6208 | 40 | 80 | 18 | 34.8 | 15.5 | 12,000 |
Data sourced from SKF 2024 catalog and FAG/NSK 2024 general catalogs. All dimensions carry GB/T 276-2013 tolerance class P0 by default. For tighter clearance control, specify P6 or P5; lead times from MS Bearings factory are 15-20 days for P6/P5 with a minimum order of 100 pieces.
- Bore tolerance for standard P0 is +0 / -12 μm at 40 mm nominal (per ISO 286-1).
- Outer diameter tolerance is +0 / -13 μm at 80 mm nominal.
- Width tolerance is ±80 μm for 18 mm nominal.
These tolerances ensure drop-in replacement for OEM bearings from SKF, FAG, NSK, NTN, and Timken without re-boring the housing or shaft.
Engineer's note: The 18 mm width is identical for sealed and open types. If your housing was machined to accept a 6208-2RS, an open 6208 will fit without modification; simply add appropriate sealing on the shaft side.
Sealed and Open 6208 Bearing Variants
Are sealed 6208 bearings larger than open versions? No. Both 6208-2RS (double-contact rubber seal) and 6208-ZZ (metal shield) maintain exactly 40 mm × 80 mm × 18 mm. The seal or shield sits internally and does not affect the outer envelope. This allows you to switch from an open bearing to a sealed one without changing housing or shaft dimensions.
- 6208-2RS: double-contact nitrile rubber seal, effective in dust and splash water environments up to +80 °C continuous, +100 °C intermittent (SKF 2024).
- 6208-ZZ: pressed steel shield, suitable for dry, clean environments and higher speeds up to +120 °C (SKF 2024).
- Open 6208: no sealing, requires external labyrinth or V-ring sealing for contamination-free operation.
Choose sealed variants for food processing conveyors, agricultural machinery, and general pumps; open bearings suit high-temperature furnaces and machine tool spindles where external sealing is integrated into the housing.
Material and Surface Treatment Comparison
Which material should you specify for your 6208 bearing application? Chrome steel (GCr15 per DIN 100Cr6) offers the best balance of load capacity and cost for most industrial uses. Stainless steel (440C per DIN X65Cr14) provides superior corrosion resistance for washdown and marine environments. Ceramic hybrid (Si3N4 balls + steel races) delivers higher speed capability and electrical insulation, while polymer-caged bearings reduce weight and noise.
| Material / Treatment | Temperature Range (°C) | Max RPM (grease) | Corrosion Resistance | Typical Applications |
|---|---|---|---|---|
| Chrome steel GCr15, standard cage | -30 to +120 | 8,500 | Low (requires lubrication) | Electric motors, gearboxes, conveyors, pumps |
| Chrome steel, black oxide coated | -30 to +120 | 8,500 | Moderate (improved freshwater resistance) | Agricultural machinery, excavators, pumps |
| Stainless steel 440C | -40 to +150 | 7,500 | High | Food processing, pharmaceuticals, marine, washdown |
| Ceramic hybrid (Si3N4 balls) | -50 to +180 | 12,000 | High | Machine tool spindles, electric vehicles, high-speed pumps |
| Polymer-caged (PA66 + GF) | -40 to +120 | 9,000 | High | Light packaging machinery, low-noise drives |
All materials comply with RoHS and REACH standards. MS Bearings can provide material certificates (EN10204 3.1) upon request. Lead time for stainless and ceramic hybrid 6208 bearings is 20-25 days from confirm order with a minimum order of 100 pieces.
Expert tip: For applications exceeding 250 °C, consult MS Bearings engineering team. Standard GCr15 raceways begin to soften at 180 °C; we offer special heat-stabilized treatments up to 250 °C and full ceramic bearings for 300 °C continuous operation.
Clearance, Fit, and Thermal Expansion Matching
How do you choose the correct clearance for a 6208 bearing? The baseline is CN (Normal) clearance per ISO 5753-1, but operating temperature and fit type dictate the optimal class. In a 40 mm bore application, a 0.025 mm interference fit on the shaft reduces inner clearance by approximately 60%. If the operating temperature reaches 80 °C, thermal expansion of the inner ring and shaft will further reduce clearance by about 15-20 μm. A C3 clearance (15-28 μm) is recommended for electric motors and gearboxes with interference fits and temperatures above 60 °C.
- Measure your shaft and housing bore to determine actual fit (interference or clearance).
- Estimate operating temperature at the bearing location.
- Calculate clearance reduction: interference fit ≈ 80% of interference, thermal expansion ≈ 0.12 μm/°C/mm of bore.
- Select clearance class: C2 (10-20 μm), C0 (10-20 μm), C3 (15-28 μm), C4 (25-45 μm).
- Validate against manufacturer data: for a 6208 at 40 mm bore, C3 is the standard upgrade for motor, gearbox, and pump applications (SKF 2024).
C3 clearance is available off-the-shelf from MS Bearings with no minimum order increase and standard 7-day lead time for quantities under 500 pieces.
Cross-Type Interchangeability for 6208 Bearings
Can you replace a 6208 deep groove ball bearing with a 6208 angular contact or cylindrical roller bearing? In many cases, yes—all share identical 40 mm × 80 mm × 18 mm envelope dimensions. However, internal load capacity and axial displacement capabilities differ, so you must confirm your application requirements before interchanging.
| Feature | Deep Groove Ball 6208 | Angular Contact 6208 | Cylindrical Roller NU2208 (6208 ODS equivalent) |
|---|---|---|---|
| Bore / OD / Width | 40/80/18 | 40/80/18 | 40/80/18 |
| Radial Load Capacity | 36.6 kN | 35.2 kN | 51.5 kN (SKF NU2208) |
| Axial Load Capacity | Moderate (both directions) | High (one direction) | Low (locating only) |
| Speed Rating (grease) | 8,500 r/min | 8,000 r/min | 8,000 r/min |
| Misalignment Tolerance | 2-4 arcmin | 1-2 arcmin | 0 (requires precise alignment) |
| Typical Applications | Electric motors, conveyors, pumps | Spindle, gearbox, machine tool | Gearbox, rolling mill, heavy machinery |
For emergency replacement, a 6208 deep groove ball bearing can often substitute for an angular contact or cylindrical roller 6208 if the axial loads are within the deep groove capacity (approximately 20% of radial load). Always verify with load calculations before interchanging.
What is the load capacity of a 6208-2RS bearing?
The basic dynamic load rating C for a standard chrome steel 6208-2RS is 36.6 kN and the static load rating C0 is 16.4 kN per SKF 2024 catalog. These ratings apply to both sealed and open 6208 bearings of the same material and geometry. For stainless steel 6208-2RS, C drops to about 32.5 kN due to lower hardness. Always apply a service factor of 1.5-2.0
