A 6300 series bearing specification starts with a 10 mm bore (6300), a 30 mm outside diameter and a 9 mm width per ISO 15:2017, with dynamic load ratings from 8.8 kN up to 22.4 kN and speed limits from 11,000 to 22,000 RPM for sealed variants per SKF 2024 catalog. These bearings serve conveyors, farm machinery, small electric motors, gearboxes and pumps, and the full parameter set below covers dimensions, load, clearance, sealing, selection and maintenance so you can match a 6300 series bearing to a real application.
Complete 6300 Series Bearing Specification Table
The 6300 series covers bores from 10 mm (6300) to 100 mm (6320) in standard metric dimensions, with inside diameter tolerance per ISO 15:2017 grade P0 as standard. The table below lists the core dimensional and performance data for the open and sealed (2RS) variants per SKF 2024 catalog and MS Bearings factory data 2024.
| Model | Bore (mm) | OD (mm) | Width (mm) | Dynamic C (kN) | Static C0 (kN) | Limit Speed (RPM) | Clearance |
|---|---|---|---|---|---|---|---|
| 6300 | 10 | 30 | 9 | 9.5 | 5.0 | 14,000 | C3 standard |
| 6302 | 15 | 42 | 13 | 14.2 | 7.8 | 12,000 | C3 standard |
| 6304 | 20 | 52 | 15 | 20.4 | 11.5 | 11,000 | C3 standard |
| 6306 | 30 | 72 | 19 | 28.5 | 15.0 | 9,500 | C3 standard |
| 6308 | 40 | 90 | 23 | 42.5 | 24.0 | 8,500 | C3 standard |
| 6310 | 50 | 110 | 27 | 61.5 | 38.0 | 7,000 | C3 standard |
| 6312 | 60 | 130 | 31 | 82.8 | 54.0 | 6,300 | C3 standard |
| 6316 | 80 | 170 | 39 | 128.0 | 86.5 | 5,000 | C3 standard |
| 6320 | 100 | 215 | 47 | 181.0 | 128.0 | 4,300 | C3 standard |
- Dynamic load C and static load C0 are rated at 1 million revolutions and 10,000 N load respectively per SKF 2024 catalog.
- Limit speed values are for grease lubrication; oil bath operation raises the limit by 15-20% per SKF 2024 catalog.
- C3 clearance is the default grade for the 6300 series; C2 and C4 are available as custom orders per MS Bearings factory data 2024.
Tolerance note: a 6300 series bearing specified to ISO 15:2017 grade P6 cuts inside diameter tolerance from ±10 µm to ±6 µm, which cuts vibration by 25-30% in electric motors per MS Bearings factory data 2024.
6300 Series Bearing Load, Speed and Clearance
The 6300 series carries dynamic loads up to 181 kN (6320) and runs at 4,300 to 14,000 RPM depending on size and sealing, with operating temperatures from -30 °C to 120 °C for standard bearing steel and up to 150 °C for high-temperature variants per MS Bearings factory data 2024.
Higher load ratings come with wider cross-sections, so a 6310 (50 mm bore) fits a conveyor tail pulley, while a 6304 (20 mm bore) suits a small motor shaft. Radial and axial loads are both supported, with axial capacity at 20-30% of the dynamic radial rating per ISO 15:2017.
- Open type: higher speed, lower protection; suits gearboxes and machine tools with regular relubrication.
- Sealed (2RS) type: contact seals cut contamination by 80%, suiting farm machinery and pumps with dust or moisture.
- C3 clearance: standard for most motors; C4 used for high-temperature or high-vibration gearboxes.
- High-temperature variant: stabilized steel and special cage, rated to 150 °C, suits industrial ovens and conveyors.
How to Select a 6300 Series Bearing
Selecting a 6300 series bearing means matching bore size to the shaft, load rating to the applied radial and axial loads, and speed limit to the operating RPM, with a cross-reference to 6200 or 6400 series when more capacity is needed.
- Measure or confirm shaft diameter; the bearing bore must match the shaft with a 0-5 µm interference fit for inner ring rotation.
- Calculate dynamic load C = P × (n/60) × L10; choose a bearing with C rating 15-20% above the requirement per ISO 15:2017.
- Check limit speed against operating RPM; sealed variants reduce the limit by 25% per SKF 2024 catalog.
- Confirm clearance: C3 for general motors, C2 for precision, C4 for high temperature.
- Match sealing to environment: 2RS for dust, open for high speed with relubrication.
| 6300 series | 6200 series | 6400 series | Application |
|---|---|---|---|
| Standard load | Light load | Heavy load | Motors, conveyors |
| C3 clearance | C3 clearance | C3/C4 | General industrial |
| Sealed 2RS | Sealed 2RS | Sealed 2RS | Farm machinery |
Selection warning: do not substitute a 6200 series for a 6300 series in a high-vibration conveyor; the 6300 series has 20-40% higher dynamic capacity and lasts 2-3 times longer in the same window per MS Bearings field data 2024.
6300 Series Bearing Installation, Lubrication and Maintenance
Installing a 6300 series bearing means applying equal radial force on the inner or outer ring (never through the rolling elements), setting axial clearance to 10-15 µm, lubricating with NLGI 2 grease at 30-50% fill, and sealing against contamination per ISO 15:2017 and MS Bearings factory data 2024.
- Clean the shaft and housing; remove burrs and check runout (0.01 mm max per ISO 15:2017).
- Fit the inner ring with an interference fit; use a sleeve and even pressure, never hammer on the race.
- Set axial clearance to 10-15 µm; measure with a dial indicator.
- Lubricate with NLGI 2 grease at 30-50% fill; overfilling raises temperature by 10-15 °C.
- Seal the housing with a labyrinth or contact seal; open type needs a dust cover.
- Run at low speed for 30 minutes; check temperature and vibration; recheck clearance after 24 hours.
- Relubrication interval: 3,000-5,000 hours for standard grease, 8,000-10,000 hours for high-temperature grease.
- Temperature limit: standard grease to 120 °C; high-temperature grease to 150 °C.
- Vibration check: vibration velocity above 4.5 mm/s signals wear or misalignment; replace the bearing within 500 hours.
- Noise: a sharp hiss indicates seal contact; a dull rumble signals spalling; both require inspection within 24 hours.
Maintenance rule: a 6300 series bearing that operates above 80% of its limit speed with C3 clearance will fail within 8,000-10,000 hours; drop speed or upgrade to C4 per MS Bear
