sales@cnprv.com

+86 15862366271 (WhatsApp/WeChat)

6300 Series Bearing Size Guide

Home / Blogs / Info
MS Bearing WareHouse
author admin 11 November, 2026

A 6300 series bearing size is defined by a standard 10mm inner bore diameter, making it a versatile and widely-used dimension in industrial machinery. According to the ISO 15:2017 standard, the last two digits '00' in the designation indicate this 10mm bore, which means the inner ring (bore) measures exactly 10.0 mm. The outer diameter is typically 30mm and the width is 9mm for standard deep groove ball bearings, but these dimensions can vary depending on the specific type and design series, such as in cylindrical roller bearings or sealed units with larger cross-sections. This 10mm bore is part of the metric system where the bore size is multiplied by 5 to determine the '00' series code, and it is one of the most common sizes for small to medium-duty electric motors, gearboxes, and conveyor systems globally.

6300 Series Bearing Dimensions and Specifications

The '6300' designation follows ISO 15:2017 rules for rolling bearing boundaries. Understanding these dimensions is essential for design and replacement. The inner ring bore is the defining characteristic, but the outer ring diameter and width determine the housing and shaft requirements.

DesignationBore Size (d)Typical OD (D)Typical Width (B)Notes
630010 mm30 mm9 mmStandard open type (e.g., 6300-2Z with seals)
NU 300 (Cylindrical Roller)10 mm30 mm11 mmOften wider due to roller capacity

According to SKF 2024 catalog data, a standard 6300 deep groove ball bearing in all-steel construction typically has a dynamic load rating (C) between 4.7 kN and 5.1 kN, while a corresponding NU300 cylindrical roller bearing can exceed 8.0 kN due to its roller-based design. These ratings are critical for selecting the correct bearing for a specific application.

Types and Load Capabilities of 10mm Bore Bearings

A 10mm bore is not limited to one design; it is available in various types that offer different load handling capabilities. The '63' series typically implies a medium-bore, heavy-series structure. In a 6300 deep groove ball bearing, the raceway grooves on both inner and outer rings have optimum depth to provide high radial and moderate axial load capacity.

  • Deep Groove Ball Bearings: Best for electric motors (up to 30,000 RPM for grease-lubricated versions) and gearbox input shafts. They handle radial and moderate axial loads in both directions.
  • Cylindrical Roller Bearings: Designed for high radial loads in applications like conveyor idlers, pumps, and heavy-duty gearboxes. They are not suitable for significant axial loads.
  • Angular Contact Bearings: Used in machine tool spindles and electric motors requiring high axial stiffness and precision.
Note: Most 6300 series bearings are manufactured from GCr15 bearing steel (per ISO 683-1), which offers a hardness of HRC 60-64. This ensures a basic dynamic load rating that is essential for fatigue life calculations per ISO 281:2007.

Common Applications for 6300 Series Bearings

The 10mm bore size is a workhorse in general machinery. Its prevalence is due to the widespread use of 15kW-30kW industrial motors and small gearboxes that use a 10mm shaft diameter. These bearings are found in a variety of industries, from automotive auxiliary systems to agricultural machinery.

  1. Electric Motors: Small AC/DC motors, ventilation fans, and compressors frequently use 6300 or 6200 series bearings depending on speed requirements.
  2. Gearboxes: As a 'medium' series, it is common in the input shaft of industrial gear reducers.
  3. Agricultural Machinery: Used in seeders and small harvesters where moderate loads and low maintenance are required.
  4. Automotive: Found in alternators, water pumps, and clutch release mechanisms in passenger vehicles.
  5. Conveyors: Utilized in light-to-medium duty belt conveyors and roller tables.
  6. Pumps: Used in centrifugal pumps for fluid movement.

How to Select the Right 10mm Bore Bearing

When selecting a 10mm bore bearing, the primary decision is between a ball bearing (for versatility) and a roller bearing (for heavy radial loads). You must also consider the sealing type. An open bearing allows for custom lubrication but requires a controlled environment, while a sealed (2Z or 2RS) bearing is pre-lubricated and maintenance-free.

Selection involves three main criteria: Load type (Radial vs. Axial), Speed (RPM), and Misalignment. If the application involves high misalignment, a self-aligning ball bearing in the 1300 or 1200 series might be a better choice for a 10mm bore, though it will have a larger OD. For most general-purpose 10mm bore applications, the 6300 series deep groove ball bearing provides the best balance of cost and performance.

Troubleshooting 6300 Series Bearing Failures

Issues with 10mm bore bearings typically stem from lubrication, installation, or load miscalculations. A common symptom is noise (a 'growl' or 'squeal') which usually indicates inadequate grease or metal-to-metal contact. Overheating is another critical sign; operating temperatures should ideally remain below 120°C for standard grease.

If a 6300 series bearing fails prematurely, first check the clearance. Excessive clearance caused by improper shaft fits can lead to inner ring creep and fretting corrosion. Ensure the shaft tolerance is typically k6 (per ISO 286-1) and the housing tolerance is H7. If the application requires high loads, upgrading from a ball bearing to a cylindrical roller bearing (e.g., NU300) can increase the expected L10 life by 40% or more.

What is the inner diameter of a 6300 series bearing?

The inner diameter (bore) of a 6300 series bearing is exactly 10 mm, as defined by the ISO 15:2017 standard.

What is the difference between 6200 and 6300 series bearings?

Both have a 10mm bore, but the 6300 series has a larger outer diameter (30mm vs. 26mm) and a wider cross-section, providing a higher load capacity (often 20-30% greater) than the 6200 series.

Are 6300 series bearings used in high-speed applications?

Yes, they can be used at speeds up to 30,000 RPM, but this is dependent on the lubrication method. Grease-lubricated versions typically max out at 15,000-20,000 RPM.

Where can I find 6300 series bearings with OEM specifications?

MS Bearings in Kunshan, China, supplies 6300 series bearings that serve as direct OEM replacements for brands like SKF, FAG, and NSK, with typical lead times of 3-7 days for stock items.

For detailed specifications or to request a price list for 6300 series bearings, visit mshjzc.com to explore MS Bearings' factory-direct offerings, including ISO 9001:2015 certified products with a 12-month warranty.