sales@cnprv.com

+86 15862366271 (WhatsApp/WeChat)

6300 Series Bearing Dimensions

Home / Blogs / Info
MS Bearing WareHouse
author admin 11 November, 2026

6300 series bearing dimensions follow ISO 15:2017, spanning a bore size from 10 mm up to 40 mm, a section that includes the most widely stocked metric deep-groove ball bearing sizes used in electric motors, pumps, conveyors, and agricultural machinery.

What are 6300 series bearing dimensions? The 6300 series is the light-to-medium metric deep-groove ball bearing family defined by ISO 15:2017. Dimensions are fully standardised: the bore diameter (d), outside diameter (D), width (B), and chamfer (r min) are the same across every reputable manufacturer worldwide. This means an MS Bearings 6308 fits any ISO-compliant 6308 housing or shaft seat, from a 0.75 kW electric motor to a small gearbox.

Are 6300 series bearing dimensions the same across brands? Yes. Per ISO 15:2017, dimensions are interchangeable between SKF, FAG, NSK, NTN, and Chinese GB/T 276 factories. Only tolerance classes and clearance grades differ between manufacturers — not the base dimensions. This is why a B2B buyer can cross-reference a 6305 specification on a competitor's drawing with confidence.

Which 6300 series size should engineers specify for a given application? That depends on shaft diameter first (the bore is fixed by the shaft), then on load and speed: 6300 through 6302 suit small motors and appliance spindles, 6303 through 6305 suit pumps and conveyors, and 6306 through 6308 cover heavier gearbox and agricultural-machinery duty (per MS Bearings factory data 2024).

This guide lists the complete dimension table, tolerance and clearance options, the failure patterns that result from dimension errors, and sourcing requirements for B2B buyers and OEM engineers.

Full 6300 Series Bearing Dimensions Table

The table below lists every standardised size from 6300 to 6308. All figures are per ISO 15:2017 and per MS Bearings factory data 2024, in millimetres.

DesignationBore (d)OD (D)Width (B)r minTypical dynamic load C (kN)
6300103091.07.6
63011237121.09.9
63021542131.011.5
63031747141.013.5
63042052151.115.8
63052562171.322.5
63063072191.328.2
63073580211.532.7
63084090231.547.5
  • Shaft and housing fits: for a normal 52 mm shaft rotation with the inner ring rotating, the recommended shaft tolerance is k6 (ISO 286-1): +0.009/+0.018 mm for 6304, and +0.011/+0.022 mm for 6305. Housing tolerance is normally H7 (0/+0.025 mm at 62 mm).
  • Chamfer note: r min is the minimum single-edge chamfer; actual production chamfers of 1.0–1.5 mm ensure assembly without edge burr damage.

Tolerance Classes: P0, P6, P5 Compared

Dimensions are fixed; tolerance class controls how tightly the actual bore and OD deviate from the nominal value. Per ISO 492:2014, three classes are available in the 6300 series:

ClassBore tolerance (17–30 mm)OD tolerance (52–80 mm)Typical use
P0 (standard)0 to +13 µm0 to +15 µmGeneral motors, pumps, machinery
P60 to +8 µm0 to +11 µmGearboxes, electric vehicles
P50 to +6 µm0 to +9 µmHigh-speed spindles, machine tools

Engineers upgrading from P0 to P6 typically reduce vibration at 1,500–3,000 rpm operating speeds and extend grease life by 15–20 percent in pump applications.

Clearance Groups and How They Affect Fit

Radial clearance is set during manufacture and is selected based on temperature rise and the type of load. Per SKF 2024 catalog, three groups are standard in the 6300 series:

  • C2: 5–13 µm (tight clearance). Used where the bearing is lightly preloaded in precision spindles.
  • C3: 15–28 µm (normal clearance). The default for electric motors, gearboxes, and conveyors.
  • C4: 28–45 µm (loose clearance). Required where inner and outer rings run at different temperatures, such as in fully sealed motors at 200 °C.
Practical rule: for every 25 °C of operating temperature difference between the inner and outer ring, clearance changes by approximately 10–15 µm. A C3 6306 (base 20 µm) running at 120 °C inner ring with a 70 °C housing will lose enough clearance that C4 becomes the safer choice.

What Happens When Dimensions Are Wrong

Three failure patterns account for most field returns in 6300-series service:

  1. Overheating from excessive preload. A P6 bearing on a mis-machined shaft seat pushes clearance below 5 µm; at 2,900 rpm the temperature rises 20–40 °C above the grease limit (120 °C for lithium grease), causing lubricant breakdown.
  2. Vibration from clearance loss at high speed. C3 clearance in a 4,000 rpm spindle can migrate into negative clearance, generating rolling contact fatigue in 3–6 months.
  3. Race edge cracking from too-small chamfer. An r min below 1.0 mm on 6305 allows edge stress concentration; per field data, premature failures occur at the raceway edges within 500–1,000 hours.

Engineers who encounter these issues should measure actual bore (d) and OD (D) with a 0.001 mm micrometer and compare against the ISO 15:2017 table above before replacing the bearing.

B2B Sourcing Requirements for 6300 Series Bearings

Buyers procuring 6300 series bearings should verify four qualifications:

  • Certification: ISO 9001:2015 covers production; dimensions must carry a certificate per batch.
  • Delivery: MS Bearings dispatches stocked 6300 series orders within 24 hours from Kunshan; customised tolerance batches require 7–15 working days.
  • MOQ and pricing: MOQ is typically 500 pcs per size; volume pricing tiers start at 1,000 pcs with a 3–5 percent discount.
  • Warranty and OEM fit: a 12-month warranty is standard; the dimensions are direct replacements for SKF 6200/6300, FAG 6200/6300, and NSK 6200/6300 listings.

FAQ