sales@cnprv.com

+86 15862366271 (WhatsApp/WeChat)

6308 Bearing Specification: Complete Guide

Home / Blogs / Info
MS Bearing WareHouse
author admin 12 November, 2026

What are the 6308 bearing specifications? A 6308 bearing is a medium-sized deep groove ball bearing measuring 40 mm inner diameter (bore), 90 mm outer diameter (OD), and 23 mm width, with a basic dynamic load rating C of 32.5 kN and a basic static load rating C0 of 17 kN per ISO 15:2017. It handles a reference speed of 14,000 RPM (oil bath) and a limiting speed of 8,000 RPM, making it a standard choice for electric motors, conveyor drives, and industrial gearboxes.

Whether you are an OEM design engineer integrating a new assembly, a procurement specialist sourcing bearings in bulk, or a field maintenance technician dealing with sudden equipment failures, verifying the exact dimensions and tolerances before purchase is critical. A slight deviation in specifications can lead to severe misalignment, excessive wear, and costly unplanned downtime. This guide breaks down every critical specification, from load capacity to clearance classes, helping you select the right component for your specific industrial application.

6308 Bearing Specifications: Bore, OD, Width, and Mass

Every standard 6308 bearing follows the ISO 15:2017 dimension series, ensuring universal interchangeability across global supply chains. Here are the primary physical dimensions and weight you must verify before installation:

ParameterMetric ValueInch Equivalent
Bore Size (d)40 mm1.5748 in
Outer Diameter (D)90 mm3.5433 in
Width (B)23 mm0.9055 in
Mass (m)0.65 kg1.43 lbs
Fillet Radius (r) min.1.5 mm0.059 in

These dimensions apply to sealed, open, and shielded variants alike. If your shaft uses a snap ring or housing uses a locating shoulder, strictly observe the minimum fillet radius of 1.5 mm. Ignoring this dimension creates a stress concentration point that accelerates fatigue failure under high-cyclic loads.

Load Ratings, Speed Limits, and Fatigue Life

What is the dynamic and static load rating of a 6308 bearing? The 6308 bearing specification includes a basic dynamic load rating C of 32.5 kN and a basic static load rating C0 of 17 kN per SKF 2024 catalog, supporting a reference speed of 14,000 RPM and limiting speed of 8,000 RPM. These values are the starting point for calculating the L10 fatigue life, which defines the expected operational lifespan.

  • Dynamic Load (C): 32.5 kN. This represents the constant radial load that 90% of a bearing population can endure for one million revolutions.
  • Static Load (C0): 17 kN. The load limit before permanent deformation occurs at rest. Critical for slow-moving or frequently start-stop applications like agricultural machinery.
  • Reference Speed: 14,000 RPM (oil lubrication). The speed at which the bearing can operate continuously without excessive heat generation.
  • Limiting Speed: 8,000 RPM. The absolute maximum speed before centrifugal forces cause the rolling elements to deform the raceways.

For electric motors and continuous-duty pumps, calculating the L10 life against the 32.5 kN dynamic rating is essential for maximizing uptime.

Cage Design, Internal Clearance, and Materials

Which cage design and internal clearance class should you select? The 6308 bearing features a two-piece stamped steel cage as standard, supports the C3 clearance class for high-temperature applications, and is manufactured from 52100 chrome steel per ISO 15:2017. Internal clearance directly dictates thermal behavior during operation.

  • Standard Clearance (CN): Suitable for regular industrial operations.
  • C3 Clearance: Recommended for high-speed spindles, electric motors, and applications with marginal alignment. C3 allows for greater thermal expansion without binding.
  • C4 Clearance: Required for extreme temperature gradients, though availability should be confirmed with your supplier as it is less common than C3.
  • Cage Type: The standard 6308 uses a robust two-piece stamped steel cage, which offers excellent strength for high-impact environments. Snap-in plastic cages are also available for specific applications requiring lower noise levels and reduced friction.

Material construction typically involves 52100 bearing steel with through-hardening. In the food processing industry, rust-resistant 440C stainless steel is an option, but it reduces the load capacity by 15-20% and should be specified only if corrosion resistance is critical.

Seals, Lubrication, and Operating Temperature

Can the 6308 bearing operate at high temperatures? Yes, an open-type 6308 bearing operates continuously up to 120 °C and intermittently up to 200 °C using synthetic lubricants. Sealed variants operate up to 80 °C due to the thermal limits of the elastomer lip material.

Lubrication determines lifespan; incorrect grease selection or lack of replenishment accounts for over 50% of bearing failures. Depending on your specific machine design, you have three primary seal options:

  1. Open: Requires a sealed housing to contain oil baths or frequent manual grease application. Best for heavy-duty gearboxes.
  2. Dust Shield: Features non-contacting metal deflectors that deflect debris while keeping friction to a minimum. Best for moderate-duty electric motors.
  3. Sealed: Includes contacting rubber (NBR) or silicone seals for aggressive washdown environments like food processing. Best for washdown applications, though they require pre-lubrication and offer higher friction.

A grease with an NLGI 2 grade (e.g., lithium-complex) provides a balanced mix of consistency and flow for standard open 6308 bearings in conveyor systems. For high-speed applications above 5,000 RPM, synthetic PAO-based grease is recommended. If using grease at high speeds, ensure a minimum load P ≥ 0.02 × C to prevent bearing skidding on the shaft.

Industrial Applications and OEM Replacement

Where are 6308 bearings used? The 6308 bearing specification fits industrial motors, gearboxes, conveyors, agricultural machinery, pumps, and automotive transmissions, making it an ideal factory-direct OEM replacement for SKF 6308, FAG 6308, NSK 6308, and NTN 6308 bearings. The 40 mm bore aligns perfectly with standard electric motor shafts, ranging from compact 7.5 kW motors up to large industrial drives.

Here are three common operational scenarios:

  • Electric motors: The 6308 handles radial loads from the motor rotor while accommodating minor shaft deflection. A C3 clearance with grease ensures smooth operation for continuous duty.
  • Agricultural machinery: In combine harvesters or tractors, 6308 bearings support input shafts for grain augers and power take-off (PTO) shafts, where misalignment and dirt are persistent issues. Sealed variants are essential here to prevent crop debris ingress.
  • Industrial gearboxes: The 32.5 kN dynamic rating ensures durability for intermediate shafts in worm or helical gear trains, where load profiles fluctuate frequently.

MS Bearings, based in Kunshan, Jiangsu, supplies 6308 bearings factory-direct to OEMs and distributors in over 30 countries. Every batch is manufactured under ISO 9001:2015, features C3 clearance as standard unless specified, and ships within 24 hours with a 12-month warranty. Our 6308 bearings meet the same critical dimension and performance specifications as major European and Japanese OEMs, providing a reliable and cost-effective alternative for your maintenance or production needs.

Frequently Asked Questions