sales@cnprv.com

+86 15862366271 (WhatsApp/WeChat)

Agricultural Bearings: Disc Harrows, PTOs and Tractor Hubs

MS Bearing WareHouse

Farm equipment sees mud, dust, water and heavy shock load. Agricultural bearings are built to survive that environment. This guide covers the common agricultural bearing types.

See also deep groove bearings.

Typical Agricultural Bearings

Ball Bearing Units (UC, UCP, UCF)

The most common agricultural bearing. A sealed insert bearing sits in a cast iron or stamped steel housing. The housing bolts to the frame, and the bearing is locked to the shaft with an eccentric collar or set screws.

Used on conveyor drives, augers, tillage tools and hay equipment. They are relubricatable through a zerk fitting on the insert.

Disc Harrow Bearings

Special square-bore or round-bore bearings designed to mount directly on disc arbors. They are sealed against mud and carry heavy shock load from digging through soil.

PTO Support Bearings

Center support bearings for long PTO drive shafts between tractor and implement. They are usually ball bearings in a rubber-mounted housing, absorbing vibration.

Wheel Bearings on Wagons and Combines

Tapered roller bearings in hubs, similar to truck wheel ends. They carry heavy loads and are repacked with grease annually.

Agricultural Bearing Design Priorities

  1. Sealing - triple lip seals keep mud and water out
  2. Relubrication - zerk fitting lets you flush out contaminants with fresh grease
  3. Corrosion resistance - coated or stainless steel where washdown is frequent
  4. Shock resistance - heavy duty cages and hardened rings

Common Agricultural Bearing Failures

  • Mud and water entry through torn seals
  • Running out of grease after a long season
  • Shock load hitting a rock in tillage equipment
  • Improper locking collar (loose collar spins on the shaft)

Frequently Asked Questions

How often should I grease agricultural bearings?

Every 40 to 100 hours of operation during the season. Pump until fresh grease exits the seal. Do not over-grease; it blows out the seal.

Can I use a standard pillow block in the field?

Standard industrial pillow blocks are not sealed well enough for mud. Use agricultural-duty units with triple lip seals and a zerk fitting.

What is a square bore bearing?

Disc harrow and planter bearings often have a square inner bore that fits a square arbor. No set screws needed - the square shape drives the bearing.

Related Reading

Need Agricultural Bearings?

MS Bearing supplies agricultural ball bearing units, disc harrow bearings and PTO support bearings with triple lip seals and relubrication fittings. Send us your implement model or bearing number, and we will confirm replacements.