sales@cnprv.com

+86 15862366271 (WhatsApp/WeChat)

Wind Turbine Bearings: Yaw, Pitch and Main Shaft

MS Bearing WareHouse

Wind turbines are among the most demanding bearing applications on Earth. They run 20 years in remote locations, see huge fluctuating loads, and are almost impossible to service. This guide covers the bearing positions in a modern wind turbine.

See also spherical roller bearings.

Main Shaft Bearings

The main shaft connects the rotor hub to the gearbox. On larger turbines, one or two spherical roller bearings carry the combined radial and thrust load. They are huge: bore sizes from 200 mm to over 1 meter. The bearing must last 20 years without replacement.

Because the turbine yaws into the wind, the main bearing sees fluctuating load direction. Spherical roller bearings are used because they tolerate shaft deflection and misalignment.

Yaw Bearings

The yaw bearing allows the entire nacelle to rotate around the tower to face the wind. It is a large crossed roller or four-point contact ball bearing, externally geared. It rotates slowly (a few turns per day) under huge static load.

Pitch Bearings

Each blade rotates on its own pitch bearing to adjust angle. These are also large crossed roller bearings, mounted between the blade root and the hub. They carry aerodynamic loads and rotate slowly to feather the blade in storms.

Gearbox and Generator Bearings

The gearbox multiplies rotor speed to generator speed. It uses cylindrical roller, tapered and spherical roller bearings on each shaft. The generator uses deep groove or cylindrical roller bearings, often insulated to prevent electric fluting from the converter.

Why Wind Turbine Bearings Are Special

  • Designed for 20-year life, 175,000 hours minimum
  • Fluctuating loads and variable speeds (not steady)
  • Grease lubrication, difficult to relubricate at height
  • Condition monitoring with vibration sensors on every bearing
  • Insulated or hybrid bearings on the generator shaft

Frequently Asked Questions

What is the most common wind turbine bearing failure?

Main bearing axial cracking (white etching cracks) from specific steel microstructures. Gearbox bearing micropitting is also common. These are active research topics in the wind industry.

Why are wind turbine bearings so expensive?

They are custom large bearings with 20-year design life, special steels and stringent quality control. A main shaft bearing for a 2 MW turbine costs tens of thousands of dollars, and replacing it requires a crane.

How are wind turbine bearings monitored?

Every critical bearing has vibration and temperature sensors connected to a SCADA system. Operators watch for early fault signatures before the bearing fails, and plan replacement during a calm-weather maintenance window.

Related Reading

Need Wind Turbine Replacement Bearings?

MS Bearing supplies replacement bearings for wind turbine gearboxes, generators and yaw/pitch applications. Send us your turbine model and bearing drawing, and our engineers will confirm the correct cross-reference.