sales@cnprv.com

+86 15862366271 (WhatsApp/WeChat)

Bearing Fitting Tolerances: Shaft and Housing Fits

MS Bearing WareHouse
author admin 09 November, 2026

The correct bearing can still fail prematurely if it is mounted with the wrong fit on the shaft or in the housing. Bearing fitting is not optional: the rotating ring must have an interference fit so it does not creep on its seat, while the stationary ring can have a transition or clearance fit to allow axial floating. This guide explains how to choose the right tolerance classes.

Pair this with our guide to load rating and L10 life and the bearing type overview.

Principle: Rotating Ring Gets Interference

The fundamental rule of bearing fitting is simple:

  • The rotating ring should have an interference fit so it is locked to its mating part and cannot spin (creep) under load.
  • The stationary ring can have a transition or clearance fit so it can slide axially if needed (floating bearing).

In most machines, the inner ring rotates with the shaft and the outer ring sits stationary in the housing. This means the inner ring needs an interference fit on the shaft, while the outer ring can be slightly looser in the housing bore.

Common Shaft Tolerances

Load ConditionShaft ToleranceApplication
Light / variable loadg6Pulleys, idler sheaves
Normal loadh6Precision gears, small motors
Normal to heavy loadj6 / js6General industrial use
Heavy / shock loadk6Conveyors, gearboxes
Heavy shock, large borem6 / n6Mining, rolling mills

Common Housing Bore Tolerances

ConditionHousing ToleranceUse Case
Outer ring rotatesJ7 / JS7Wheels, rolling mill necks
Outer ring stationary, normal loadH7General motors, pumps
Outer ring stationary, heavy loadK7Conveyor pulleys
Floating bearing outer ringH7NU/N series bearings

When the Outer Ring Rotates

In some applications - vehicle wheels, conveyor pulleys, rolling mill necks - the outer ring rotates and the inner ring is stationary on a fixed axle. The rule reverses: the outer ring needs an interference fit in the housing, while the inner ring can be a transition or clearance fit on the shaft. This is why wheel hubs use pressed outer cups and loose inner cones.

Fit and Internal Clearance

An interference fit on the inner ring stretches the ring, which reduces the internal radial clearance. When selecting a C3 or C4 clearance class, remember that a k6 or m6 shaft fit can consume 20 to 40 percent of the nominal clearance. For motors running at high temperature, C3 clearance is standard because the inner ring runs hotter than the outer ring and expands more.

Frequently Asked Questions

What happens if the fit is too loose?

The ring creeps on its seat. Fretting corrosion develops, the shaft or housing bore wears, and the bearing runs hot. Eventually the ring spins completely and seizes.

What happens if the fit is too tight?

The internal clearance vanishes. The bearing runs hot, lubricant breaks down, and the rolling elements brinell the raceway. In extreme cases, the inner ring cracks under tensile stress.

Do I need a C3 clearance for a motor bearing?

Yes. Electric motor bearings almost always use C3 internal clearance because the inner ring runs warmer than the outer ring, reducing clearance during operation.

Related Reading

Need Fit Recommendation?

MS Bearing supplies bearings pre-fitted to adapter sleeves and withdrawal sleeves for common shaft sizes. Our engineers can recommend the correct shaft and housing tolerance for your load condition. Send us your bearing number and shaft diameter, and we will confirm the fit class.