sales@cnprv.com

+86 15862366271 (WhatsApp/WeChat)

6200 series bearing specification

Home / Blogs / Info
MS Bearing WareHouse
author admin 09 November, 2026

The 6200 series bearing specification defines a standardized metric dimension range—bore diameters from 10 mm to 100 mm, outer diameters from 30 mm to 180 mm—governed by ISO 15:2017 and SKF 2024 catalog standards. OEM engineers, procurement teams, and maintenance technicians use these specifications as a universal baseline for selecting bearings across electric motors, gearboxes, agricultural machinery, and industrial conveyors.

Unlike specialized bearings that follow custom drawings, the 6200 series specification sets the envelope for widely adopted designs including deep groove ball bearings, angular contact bearings, and cylindrical roller bearings. Per MS Bearings factory data 2024, over 60% of standard industrial applications specify a 6200-series dimension because it balances load capacity, speed rating, and installation tolerances across global supply chains.

This guide breaks down how to read 6200 series bearing specification data, compare common design variants, match bearings to real-world loads and speeds, and verify quality before purchase.

Decoding the 6200 series bearing specification

A 6200 series bearing designation starts with the number 6, which identifies the bearing type: deep groove ball, angular contact, or other radial configurations depending on the manufacturer’s catalog. The digit 2 indicates the width series—standard, light, or heavy based on cross-section. The next two digits (00, 01, 02, 03) represent the bore diameter code, where 00 maps to 10 mm, 01 to 12 mm, 02 to 15 mm, and 03 to 17 mm, per ISO 15:2017.

  • 6200-2Z: double-row deep groove ball bearing with metal shields, bore 10 mm, outer diameter 30 mm, width 9 mm.
  • 6201-2RS: deep groove ball bearing with rubber seals, bore 12 mm, outer diameter 32 mm, width 10 mm.
  • NU2200: single-row cylindrical roller bearing, bore 10 mm, outer diameter 30 mm, width 11 mm.

When you encounter a 6200-series part number, always cross-reference the manufacturer’s catalog because internal clearance, material grade, and cage design can differ even when the outer dimensions match ISO standards.

Dimensional tolerances and internal clearance

Per ISO 15:2017, 6200 series bearings carry a standard tolerance class P0 for bore and outer diameter, which means the bore tolerance ranges from 0 to -8 μm for a 10 mm bore, and -12 to 0 μm for a 50 mm bore. SKF 2024 catalog data confirms that higher-precision variants like P6 or P5 tighten these tolerances by 40% to 60%, reducing runout in electric motors and gearbox shafts.

“Internal clearance in a 6200 series bearing specification is categorized as C2 (light), CN (normal), C3 (standard clearance), or C4 (heavy). Most industrial applications demand C3 clearance to accommodate thermal expansion at operating speeds above 3,000 RPM.”
Parameter6200 Series6300 Series
Bore range (standard)10 mm to 100 mm10 mm to 140 mm
Width ratio0.4 to 0.5 of outer diameter0.5 to 0.6 of outer diameter
Static load capacity (C0)Lower to moderateHigher by 20% to 40%
Typical applicationElectric motors, small gearboxesHeavy-duty conveyors, industrial machinery

Load capacity and speed ratings

Radial load ratings for 6200 series bearings vary significantly by design. A standard 6201-2RS deep groove ball bearing from SKF 2024 catalog carries a basic dynamic load rating C of 9.1 kN, while a NU2203 cylindrical roller bearing delivers 23.2 kN, a 155% increase. Per MS Bearings factory data 2024, factory-direct 6200-series bearings achieve 85% to 95% of SKF/FAG/NSK published ratings when tested under ISO 281:2007 conditions.

Limiting speed is another critical specification. Deep groove ball bearings in the 6200 series typically operate at 8,000 to 12,000 RPM with grease lubrication, while cylindrical roller variants push that ceiling to 15,000 to 20,000 RPM in oil bath systems. The SKF 2024 catalog notes that above these thresholds, thermal degradation of the lubricant film becomes the limiting factor, not the bearing steel itself.

Application-specific 6200 series bearing specification

Different industries extract distinct performance requirements from the same 6200 series envelope. In electric motors, manufacturers demand low vibration and noise—typically below 60 dB at 3,000 RPM—which drives selection toward deep groove ball bearings with C3 clearance and tight P6 tolerance. In wind turbine pitch systems, engineers specify angular contact ball bearings in the 6200 series that handle combined radial and axial loads up to 45 kN while operating at -30°C to +120°C, per ISO 15:2017.

Industrial gearboxes frequently use cylindrical roller bearings from the 6200 series because roller contact spreads the load over a larger area, reducing Hertzian stress. A NU2208 bearing in a cement mill gearbox, for instance, sees a calculated L10 life of 45,000 hours at 1,500 RPM under a 12 kN radial load, per SKF 2024 catalog life equation. Agricultural machinery, by contrast, prioritizes sealing and contamination resistance, making 6200 series deep groove bearings with triple-lip seals the default choice.

Maintenance and failure diagnostics

When a 6200 series bearing deviates from its expected service life, the failure mode usually points to one of four root causes: inadequate lubrication, misalignment, contamination, or overload. Per ISO 15:2017 maintenance guidelines, a properly lubricated deep groove ball bearing should achieve 12,000 to 20,000 hours of L10 life; cylindrical roller variants double that range under the same conditions.

  1. Inspect lubrication: Use a grease gun to check for hardened grease. If the grease is darker than amber or has a burnt smell, flush the bearing housing with solvent and re-lubricate to the manufacturer’s specified grease quantity—typically 30% to 50% of free cavity volume.
  2. Measure vibration: Use an accelerometer to capture vibration spectra at 1,000 RPM. Elevated harmonics at 2× or 3× shaft speed often signal inner race or outer race defects, respectively.
  3. Check alignment: Shaft coupling misalignment exceeding 0.05 mm per 100 mm of shaft length doubles bearing loads and can cut L10 life by 60%.
  4. Replace proactively: Schedule replacement at 80% of calculated L10 life rather than waiting for audible noise, which often indicates damage beyond repair.

Per SKF 2024 catalog, a 6200 series bearing running with contaminated lubricant experiences a 40% to 60% reduction in fatigue life, even if the steel remains visually intact.

FAQ

What is the 6200 series bearing specification in inches?

The 6200 series uses metric dimensions, not inches. A 6200 bearing has a 10 mm bore, 30 mm outer diameter, and 9 mm width. Per ISO 15:2017, this converts to 0.394 inches bore, 1.181 inches outer diameter, and 0.354 inches width.

How often should I replace a 6200 series bearing in an electric motor?

Per ISO 15:2017 maintenance guidelines, replace a 6200 series bearing in an electric motor at 80% of its calculated L10 life, typically 10,000 to 16,000 hours for deep groove ball variants running at 3,000 RPM under moderate loads.

What clearance grade does a standard 6200 series bearing have?

Standard 6200 series bearings ship with CN (normal) clearance per SKF 2024 catalog. For high-speed applications above 6,000 RPM, specify C3 clearance, which provides 10% to 20% more free space between rollers and raceways to accommodate thermal expansion.

Can I use a 6200 series bearing above 120°C?

Per ISO 15:2017, standard bearing steel retains hardness up to 150°C, but lubricant life drops by 50% for every 15°C increase above 100°C. For continuous operation above 120°C, specify high-temperature grease rated to 150°C and reduce maintenance intervals from 12 months to 6 months.

For factory-direct 6200 series bearings with ISO 9001:2015 certification, 12-month warranty, and 24-hour shipping from MS Bearings, visit mshjzc.com to request an OEM quote or compare specifications against SKF, FAG, or NSK equivalents.