sales@cnprv.com

+86 15862366271 (WhatsApp/WeChat)

6204 Bearing Dimensions

Home / Blogs / Info
MS Bearing WareHouse
author admin 10 November, 2026

6204 bearing dimensions are standardized at 20 mm inner diameter ( bore), 47 mm outer diameter, and 14 mm width per ISO 15:2017. What are 6204 bearing dimensions? The complete metric size set is 20×47×14 mm with a 12 mm radius ( chamfer), which is why a 6204 fits the same shaft size as a 6204-2Z or 6204-2RS regardless of seal type. How to verify 6204 bearing dimensions correctly? Measure across the bore with calipers, check the outer race circumference, and confirm width at three points; true 6204 parts must stay within ISO tolerance bands. Why do 6204 dimensions matter in OEM designs? Because a 20 mm shaft and 47 mm housing bore are repeated across electric motors, gearboxes, conveyor pulleys, and pumps across multiple bearing types.

The 6204 bearing dimensions are defined for bearings with a 20 mm bore, 47 mm OD, and 14 mm width per ISO 15:2017 and SKF 2024 catalog standards. Deep groove ball, angular contact, and adapter sleeve-mounted variants share these envelope numbers, so engineers can interchange housings and shafts while changing seal or shield configurations. The chamfer size of 1.0 to 1.5 mm is also standardized to prevent edge loading in narrow housings and to keep axial clearances consistent across batches.

MS Bearings factory data 2024 shows that 6204-sized parts run in applications from 0.15 kW fan motors to 75 kW conveyor drives, confirming the dimension's cross-industry relevance. In agriculture, a 6204 installed in a wheat harvester roller must meet the same 20×47×14 mm envelope whether the part is greased for life or relubricated weekly. For automotive auxiliary shafts, a 6204 sealed variant fits the same bracket as an open bearing because the outer diameter remains 47 mm.

Standard 6204 Bearing Dimensions Table

The table below lists the full size profile per ISO 15:2017 and SKF 2024 catalog. Use it for drawing updates, housing bore inspection, and cross-referencing competitor part numbers.

DimensionMetric (mm)Inch (in)Notes
Bore (d)200.787Matches a 20 mm shaft, e.g., 6204 ZZ
Outer Diameter (D)471.850Fits 47 mm housing bore
Width (B)140.551Applies to 6204 bearing dimensions
Chamfer (r)1.0–1.50.039–0.059Protects seal lip and housing shoulder
  • Inner ring bore tolerance class P0 (ISO) is typically 0 to −8 μm for a 20 mm bore; check the grade before high-speed use.
  • Outer ring OD tolerance is usually 0 to −11 μm on a 47 mm size, ensuring proper snap-fit in cast housings.
  • Radial clearance C2, C3, or C4 does not change the 6204 bearing dimensions but affects thermal expansion fit.

How to Measure and Verify 6204 Bearing Dimensions

Confirm 6204 bearing dimensions by measuring the bore with a calibrated micrometer or bore gauge at three positions and comparing to the 20 mm nominal size. Check the outer diameter at 90-degree intervals to ensure the 47 mm reading is consistent and the race is not oval. Measure the width across the ring with a depth micrometer to verify the 14 mm dimension, and inspect chamfers visually for a 1.0–1.5 mm radius. Temperature affects readings; take measurements at 20°C to 25°C for accuracy.

  1. Clean the bearing and shaft seat; a single burr on a 20 mm shaft can force a +20 μm reading.
  2. Measure bore at 0°, 90°, 180°, and 270°; the average must be 20.00 mm ± tolerance.
  3. Check OD in two planes; if the reading exceeds −11 μm, the outer race is worn.
  4. Confirm width at three points; variation above 5 μm suggests a mis-stamped 6204.
Expert Tip: A 6204 installed on a 20 mm shaft with C3 clearance typically needs a 10–15 μm radial gap at 25°C. For every 10°C above 80°C, the shaft expands ~2 μm, so plan for a tighter clearance at higher temperatures.

In maintenance, a 6204 that runs 40 °C hotter than ambient often shows a +5 μm bore growth from wear. Use a vibration meter to confirm; if axial vibration exceeds 0.1 mm/s RMS at 1450 RPM, suspect a dimensionally out-of-spec inner ring. For conveyor applications, check housing bore too; a 47 mm seat worn by 20 μm will tilt the outer ring and shorten life.

Why 6204 Bearing Dimensions Matter for OEM Designs

The 20×47×14 mm envelope is repeated across deep groove ball, angular contact, and block bearings, so a housing designed for a 6204 accepts multiple bearing types. Electric motor designers use a 6204 for 0.15 kW to 18.5 kW outputs; the same bearing seat supports belt-drive and direct-coupled loads. In gearboxes, a 6204 on an input shaft maintains shaft alignment with a 47 mm bore, reducing edge loading. OEMs choose a 6204 when a compact, self-aligning unit is required within a 47 mm frame.

  • Electric motors: 6204 bearings handle up to 75 Hz at 0.15 kW to 18.5 kW without dimension changes.
  • Gearboxes: 6204 on input shafts at 1450 RPM benefit from a 14 mm width that keeps axial play minimal.
  • Conveyors: 6204 pulley bearings at 1450 RPM require a 1.0–1.5 mm chamfer to protect seals.
  • Agricultural machinery: 6204 on harvester rollers in dusty environments use the same 20 mm bore.

Common Failures Linked to 6204 Bearing Dimensions

A 6204 fails when the 20 mm shaft is undersized by 8 μm, allowing the inner ring to creep; a 47 mm housing bore oversized by 11 μm causes outer ring rotation. Eccentric loads from a misaligned 47 mm seat concentrate stress on one ball path, raising temperature by 20 °C. Use an infrared thermometer; readings above 120°C trigger lubricant breakdown. If a 6204 runs noisy, check for chamfer damage; a 1.0–1.5 mm radius contacting the housing lip produces a metallic tone at 1450 RPM.

Warning: A 6204 with a 0.05 mm radial clearance on a 20 mm shaft at 3000 RPM can skid and smear raceways. Always select clearance per the operating temperature profile.

Selection and Lubrication Notes for 6204 Sizes

Select a 6204 for a 20 mm shaft and 47 mm housing when the load is radial-dominant and moderate; use angular contact or cylindrical roller variants if axial or heavy radial loads dominate. Lubrication volume for a 6204 is typically 10–20 g of grease for a 20×47×14 mm part; re-lube at 8000–10,000 hours at 70°C. For a 6204-2RS sealed bearing, avoid over-greasing; keep grease fill at 30–40% to prevent churn. Use ISO VG 220 oils for gearbox sumps and NLGI 2 grease for conveyor idlers.

  • Gearboxes: 6204 in a 47 mm housing at 1450 RPM needs a 10–20 g grease charge.
  • Conveyors: 6204 idlers in dusty mills require a 1.0–1.5 mm chamfer to protect seals.
  • Electric motors: 6204 on 18.5 kW units should use C3 clearance; plan 30–40% grease fill.
  • Automotive: 6204 on auxiliary shafts at 150°C needs an outer ring width within 14 mm tolerance.

What are 6204 bearing dimensions?

6204 bearing dimensions are 20 mm inner diameter, 47 mm outer diameter, and 14 mm width per ISO 15:2017. The chamfer is 1.0 to 1.5 mm, and these figures apply across deep groove, angular contact, and sealed variants.

How to measure 6204 bearing dimensions accurately?

Measure the 20 mm bore with a micrometer, check the 47 mm OD with calipers, and verify the 14 mm width with a depth gauge. Use three points on each dimension and confirm chamfers at 1.0–1.5 mm radius.

Which applications use 6204 bearing dimensions?

6204 dimensions fit electric motors from 0.15 kW to 18.5 kW, gearbox input shafts, conveyor pulleys, agricultural rollers, automotive auxiliary shafts, and pumps.

Can 6204 bearing dimensions affect lifespan?

Yes; a shaft undersized by 8 μm on a 20 mm bore allows inner ring creep, and a housing bore oversized by 11 μm on 47 mm allows outer ring rotation, both shortening life. Maintain the 1.0–1.5 mm chamfer to protect seals.

Where to buy 6204 bearing dimensions that match ISO 15:2017?

MS Bearings supplies 6204 bearings with 20×47×14 mm dimensions per ISO 15:2017, with ISO 9001:2015 certification, 24-hour shipping, and 12-month warranty. Visit mshjzc.com for OEM specifications.

For technical data, OEM replacements, or distributor pricing on 6204 bearing dimensions, contact MS Bearings, a factory-direct supplier exporting to 30+ countries.