sales@cnprv.com

+86 15862366271 (WhatsApp/WeChat)

What Is a Pillow Block Bearing? Units, Housings and Applications

Home / Bearing Basics / Info
MS Bearing WareHouse
author admin 09 November, 2026

A pillow block bearing is a ready-to-mount unit consisting of an insert ball bearing sealed on both sides, pressed into a cast iron or stamped steel housing. You bolt it directly to a frame—no housing machining needed. Pillow blocks are the fastest way to support a shaft in conveyors, fans, agricultural machinery and food processing lines.

Common Housing Styles

SeriesShapeTypical use
UCPTwo-bolt pillow blockConveyors, pulleys, general support
UCFFour-bolt flangeWall-mounted, space-constrained
UCFLTwo-bolt oval flangeLight wall mounting
UCTTake-up unitChain tensioning, conveyor tension
UCPARound pressed steelLight duty, food and clean areas

How the Insert Mounts

The insert bearing has a spherical outside diameter that matches the spherical bore of the housing, providing self-alignment. The inner bore extends on both sides and is locked to the shaft either by set screws, an eccentric locking collar or a concentric adapter. Set-screw locking suits light to moderate load; eccentric collars reduce noise at high speed; adapter locking is used for heavy shock.

Materials and Seals

Housings are cast iron (standard), pressed steel (light), stainless steel (food and washdown) or thermoplastic (corrosive). Inserts come with double-lip contact seals for dirty environments. See seals and shields.

Typical Applications

Pillow blocks dominate agricultural equipment, conveyor rollers, belt tensioners, fan shafts, food conveyors and light industrial pulleys. They are pre-greased and sealed, so installation is bolt-and-go. For heavy shock and high radial load, switch to a plummer block with a spherical roller insert.

FAQ

Q: Can I mount a pillow block on an un-machined frame?
A: Yes. The machined housing face mates to a flat plate; no precision machining is needed.

Q: How do I lock the shaft?
A: Standard UCP units use two set screws on the inner ring. Tighten to the recommended torque after sliding the unit on.

Q: Are pillow blocks self-aligning?
A: Yes. The spherical OD of the insert sits in a matching spherical bore, allowing about 2–5 degrees of misalignment.

Related Reading

Need pillow block units for a conveyor or fan? Tell us shaft diameter and load—we supply UCP, UCF and take-up units in cast iron or stainless.