Gearboxes run some of the heaviest bearing loads in industry. Gear mesh generates combined radial and thrust loads, shock and vibration. This guide covers the bearing types engineers use in gearboxes.
See also cylindrical rollers and tapered rollers.
What Loads Does a Gearbox Bearing See?
- High radial load from gear tooth contact
- Axial thrust from helical and bevel gears
- Shock load from start-stop and load reversals
- High operating temperature (oil churning)
Deep groove ball bearings are almost never used in industrial gearboxes because they cannot handle the heavy combined loads.
Typical Gearbox Bearing Selection
Cylindrical Roller Bearings
Used for pure radial load positions. NUP or NJ types are common as the fixed bearing, NU or N as the floating bearing. They carry very high radial load and allow axial sliding.
Tapered Roller Bearings
Used for combined radial and axial load. Common in automotive differentials, wheel hubs and small gearboxes. Always used in pairs (X or O arrangement). Preloaded to remove clearance.
Spherical Roller Bearings
Used where shaft deflection and misalignment are significant. Common in large industrial gearboxes, conveyor pulleys and paper machines. They self-align and carry very high radial load plus some axial.
Typical Gearbox Layout
A layshaft in a helical gear reducer typically has:
- One NUP cylindrical roller bearing (fixed, handles axial thrust)
- One NU cylindrical roller bearing (floating, allows thermal expansion)
The pinion shaft often uses a pair of tapered roller bearings or angular contact ball bearings to handle the combined gear loads.
Lubrication
Gearboxes use oil bath or circulating oil. The oil must also lubricate the gears, so it is usually ISO VG 150 to 320 - much thicker than motor bearing oil. Gear oil with extreme pressure (EP) additives protects both gears and bearings.
Frequently Asked Questions
Why do gearbox bearings fail faster than expected?
Most often from gear wear particles circulating in the oil. The particles act as abrasives. Use filtered oil and change it on schedule. Magnet plugs catch steel particles.
Can I use ball bearings in a gearbox?
Yes in small, light-duty gearboxes. For industrial gearboxes over 10 kW, roller bearings are standard because they carry more radial load in the same envelope.
Why does my gearbox whine?
Whining is usually a gear mesh problem, not a bearing problem. But if a tapered roller bearing is over-preloaded, it can also whine. Check preload and backlash.
Related Reading
Need Gearbox Bearings?
MS Bearing supplies cylindrical, tapered and spherical roller bearings for industrial gearboxes. Send us your gearbox model or bearing numbers, and we will confirm replacements with the correct internal clearance.
