Compressors are among the toughest bearing applications: pulsating load, high speed, oil lubrication and frequent starts. Bearing failure in a compressor stops production, so selection is critical.
Reciprocating Compressors
Reciprocating compressors have crankshafts with heavy radial and axial loads. Main bearings are usually cylindrical roller bearings for the crank supports, plus thrust bearings for axial load. Shock load means high static safety factor S0—typically 2 or more. See S0.
Screw Compressors
Oil-injected screw compressors run at high speed with combined radial and axial load. The male and female rotors are supported by cylindrical roller bearings (radial) and angular contact ball bearings or tapered roller bearings (axial thrust). The oil system also cools the bearings.
Centrifugal Compressors
High-speed centrifugal compressors use precision angular contact bearings tilting pad or active magnetic bearings. Oil-film and oil-air lubrication are standard. Speed limits are critical—see speed limits.
FAQ
Q: Why do compressor bearings fail?
A: Oil contamination, liquid slugging and high starts/stops are common. Keep the oil clean and change filters on schedule.
Q: Are compressor bearings special?
A: Yes. They usually need higher static safety factor, oil lubrication and tighter tolerance than general duty.
Related Reading
Sizing bearings for a screw or reciprocating compressor? Tell us compressor type and power—we recommend radial and thrust arrangements.
