sales@cnprv.com

+86 15862366271 (WhatsApp/WeChat)

Bearing Damage Quick Reference Chart

MS Bearing WareHouse

This quick reference table summarizes the most common bearing damage patterns, their root causes, and what to do immediately. Print it and keep it at your maintenance bench.

See also fatigue spalling and contamination.

Damage Diagnosis Table

Symptom on BearingRoot CauseImmediate ActionLong-Term Fix
Even spalling across racewayNormal fatigue, end of lifeReplace bearingConfirm sizing is adequate
Brushed, polished racewayContamination / abrasive wearReplace bearing, clean housingUpgrade seals, filter oil
Parallel grooves (washboard)Electric fluting (VFD current)Replace with insulated/hybridAdd shaft grounding ring
Even indentations at ball spacing + red dustFalse brinelling / frettingReplace bearingRotate stored shafts, anti-fretting grease
Blue or brown discolorationOverheatingStop, cool downReduce preload, check clearance, relubricate
Indentations at random positionsTrue brinelling from shockReplace bearingReduce shock load, check sizing
Cracked inner or outer ringOverload, misalignment, press damageReplace bearing immediatelyCheck alignment, correct press method
Cage broken or pocket wornLubrication failure, skidding, high speedReplace bearingCorrect lubrication, check speed limit
Rust on racewayWater entry, humidity, no rust protectionReplace bearingImprove seals, add vapor corrosion inhibitor
Grease looks black and grittyContaminated, oxidized greaseFlush and repackShorten relubrication interval

The Four-Step Diagnosis Process

  1. Stop the machine safely and let it cool.
  2. Take photos of the bearing before disassembly (raceway, rolling elements, cage, seals).
  3. Compare the damage pattern against this table.
  4. Fix the root cause before installing the new bearing, or it will fail the same way.

Frequently Asked Questions

What if I see more than one damage pattern?

That is common. Start with the most severe or earliest pattern. For example, contamination causes abrasive wear, which then causes early fatigue spalling. Treat the root cause (contamination) first.

How do I photograph a bearing for diagnosis?

Use a phone macro mode in bright light. Shoot the raceway, rolling elements, cage and seals from multiple angles. Send the photos to your supplier for expert analysis.

Should I always replace with the exact same bearing?

If the old bearing failed prematurely, consider upgrading: better seals, higher clearance, different material, or a larger size. The root cause determines the upgrade.

Related Reading

Need Expert Diagnosis?

MS Bearing engineers can review photos of your failed bearings and recommend the correct replacement. Send us the bearing number and photos, and we will respond with root cause and recommended upgrade within 24 hours.