If a bearing turns blue or brown, it has been running too hot. Heat is a symptom, not a cause. This guide explains the common causes of bearing overheating and how to diagnose them.
See also raceway damage and lubrication.
What the Color Means
- Light straw / yellow - normal tempering color, mild overheat around 100 to 150 C
- Brown - overheating around 200 C, lubricant breaking down
- Blue - serious overheating above 300 C, steel tempering has occurred
- Black / burnt - catastrophic overheat, bearing is wrecked
Blue discoloration means the raceway has softened. Even if the bearing keeps running, it will spall very quickly.
Common Causes of Overheating
1. Over-Greasing
The #1 cause of hot motor bearings. The churning grease generates friction heat. The simple fix: remove the drain plug and let excess grease escape, then run the bearing. Temperature should drop within minutes.
2. Too Little Internal Clearance
If C0 clearance was used instead of C3, or the interference fit is too heavy, the rolling elements are pinched. The bearing runs hot from the moment it starts. Replace with C3 or C4 clearance.
3. Lack of Lubrication
If the grease has dried out or washed out, metal-to-metal contact generates heat. Check the grease condition. If it is dry and crumbly, relubricate immediately.
4. Misalignment
A bent shaft or misaligned housing causes edge loading on the rollers, generating local heat. Check alignment and shaft straightness.
5. Too Much Preload
Paired angular contact or tapered roller bearings that are over-tightened run hot. Reduce preload to the manufacturer's specified drag torque.
Normal Operating Temperature
A running bearing should feel warm to the touch but not too hot to hold. Typical housing temperatures are 40 to 70 C. If the housing exceeds 90 C, something is wrong. Measure with an infrared gun or thermocouple.
Frequently Asked Questions
My new bearing runs hot after installation. What is wrong?
Most likely over-greasing or wrong clearance. Remove excess grease, then check that C3 clearance was used. If it still runs hot, check the shaft fit.
Can I cool down a hot bearing with water?
No. Thermal shock cracks the raceway. Let it coast to a stop naturally. If you must cool it, use forced air.
How hot is too hot?
Continuous housing temperature above 90 C is a red flag. Above 120 C, the grease life drops to a fraction of its rated value. Above 150 C, the steel starts to temper.
Related Reading
Need Help Diagnosing Hot Bearings?
MS Bearing engineers can help you troubleshoot overheating bearings. Send us the bearing number, measured temperature and lubrication history, and we will identify the likely cause and recommend a fix.
