sales@cnprv.com

+86 15862366271 (WhatsApp/WeChat)

Bearing Vibration Velocity and Acceleration: mm/s Values Mean

MS Bearing WareHouse

Vibration is the earliest measurable sign of bearing damage. Modern predictive maintenance programs track vibration velocity and acceleration on motors, pumps and fans. Knowing the alarm thresholds tells you when to plan a replacement.

Velocity (mm/s RMS)

Overall vibration velocity in mm/s RMS reflects machine condition—imbalance, misalignment, looseness and developing bearing defects. ISO 10816 sets typical alarm bands:

Velocity mm/s RMSCondition
0–1.8Good
1.8–4.5Satisfactory
4.5–7.1Acceptable, monitor
7.1–11.2Unsatisfactory, plan maintenance
above 11.2Unacceptable, shut down soon

Acceleration (g) and Envelope

Early bearing defects show up as high-frequency bursts (inner race, outer race, rolling element defect frequencies). Vibration acceleration or enveloped acceleration detects these before overall velocity rises. Trending is more important than a single reading. See vibration monitoring.

What Rising Trends Mean

A slow rise in velocity points to imbalance, alignment or looseness. A sharp rise in high-frequency acceleration with a specific defect frequency points to raceway spalling. A rise in both points to advanced damage. See fatigue spalling.

FAQ

Q: Is 4.5 mm/s acceptable?
A: On motors above 15 kW, 4.5 mm/s is the upper end of satisfactory. On small machines, thresholds are lower.

Q: Should I monitor on the bearing housing or the shaft?
A: Mount the probe on the bearing housing in the radial direction, perpendicular to the load zone.

Related Reading

Setting up a vibration route? Tell us your machine types—we recommend measurement points and alarm thresholds.