Grease is not just oil with soap added. The consistency grade - measured on the NLGI scale - determines whether the grease stays in the bearing, runs at high speed, or drains out of a vertical shaft. This guide explains the NLGI grades and how to select the right one.
See also grease vs oil and seals.
The NLGI Consistency Scale
The National Lubricating Grease Institute (NLGI) grades grease by its worked penetration - how far a standard cone sinks into the grease under fixed weight and time. Higher number means stiffer grease.
| NLGI Grade | Consistency | Typical Use |
|---|---|---|
| 000 | Fluid, like oil | Gearboxes, central lubrication systems |
| 00 | Semi-fluid | Gearboxes, enclosed drives |
| 0 | Very soft | Centralized systems, cold environments |
| 1 | Soft | Central lubrication, low-temperature bearings |
| 2 | Standard (peanut butter) | Most rolling bearings, the default choice |
| 3 | Stiff (like butter) | Vertical shafts, high-temperature, vibration-prone |
| 4 | Very stiff | Extreme vibration, large slow bearings |
Why NLGI 2 Is the Default
NLGI 2 is the most common bearing grease consistency. It is soft enough to flow into the rolling contact but stiff enough to stay in the bearing without dripping. Most sealed and shielded bearings from the factory are packed with NLGI 2 lithium grease.
When to Use Softer Grease (NLGI 1 or 0)
- Cold environments where stiff grease would not pump
- Central lubrication systems that pump grease long distances
- Very high-speed bearings where stiff grease causes churning heat
When to Use Stiffer Grease (NLGI 3 or 4)
- Vertical shafts where grease would sag downward
- High-temperature applications where soft grease drips out
- Heavily vibrating equipment that pumps grease out of the bearing
- Large, slow bearings in crushers and mills
Oil Content and Base Oil Viscosity
Consistency is only half the story. The base oil viscosity also matters. A stiff NLGI 3 grease with low-viscosity oil is not the same as NLGI 3 with high-viscosity oil. For high-speed bearings, choose low-viscosity base oil (ISO VG 32 to 68). For heavy load and high temperature, choose higher viscosity (ISO VG 150 to 460).
Frequently Asked Questions
What does NLGI 2 feel like?
About the consistency of peanut butter. It holds its shape at room temperature but spreads easily when worked.
Can I use NLGI 3 grease in a standard motor bearing?
It will work but may run slightly hotter at high speed. NLGI 2 is the standard for most electric motor bearings. Switch to NLGI 3 only for vertical shafts or high-temperature applications.
What grease is used for food-grade bearings?
Food-grade greases (NSF H1) are typically NLGI 2 with aluminum complex or calcium sulfonate thickener and white oil or synthetic base oil.
Related Reading
Need Bearing Grease?
MS Bearing supplies pre-greased bearings with standard lithium NLGI 2 grease. We can also supply bearings pre-packed with high-temperature, food-grade or synthetic grease on request. Send us your temperature and speed requirements.
