Choosing the right seal is a trade-off between contamination protection and friction heat. This recap summarizes the decision path so you can pick the right option on the next bearing order.
See also lubrication basics and seal types detail.
Four Protection Levels
| Option | Friction | Protection | Speed |
|---|---|---|---|
| Open (no seal) | Lowest | None (rely on housing) | Highest |
| Steel shield (Z/ZZ) | Very low | Blocks large dust, retains grease | High |
| Non-contact seal (V labyrinth) | Low | Good dust protection | High |
| Contact seal (RS/2RS) | Moderate | Best against dust and water | Lower (by 20-30%) |
Decision by Environment
- Clean indoor, high speed (motors, fans) - ZZ shielded or open
- Normal factory, general machinery - 2RS contact seal
- Dusty workshop, wood, cement - 2RS plus housing lip seal
- Washdown, food, pharma - 2RS (FKM or silicone), stainless rings
- High temperature above 100 C - open bearing, external housing seal
- Outdoor, rain, agriculture - 2RS (NBR or FKM), plus shaft seal
Rubber Material Quick Pick
- NBR (nitrile) - default, -30 to +100 C, cheap, good grease resistance
- FKM (Viton) - up to +180 C, chemical resistant, more expensive
- Silicone - low temperature flexibility, used in food industry
Frequently Asked Questions
Can I upgrade from ZZ to 2RS on an existing machine?
The bearing envelope is the same, so it fits. But 2RS adds friction heat. If the machine runs near the speed limit, 2RS may overheat. Check the thermal speed rating.
Do 2RS bearings come pre-greased?
Yes. Both ZZ and 2RS bearings are pre-greased at the factory. You do not add grease during installation. The grease is rated for life.
How long do rubber seals last?
NBR seals typically last 5 to 8 years at room temperature. At 100 C, they age much faster. For high-temperature duty, use FKM or open bearings with external seals.
Related Reading
Need Sealed Bearings?
MS Bearing supplies open, ZZ and 2RS versions of all standard series in NBR and FKM. Send us your environment and speed, and we will recommend the correct seal option with your quote.
