sales@cnprv.com

+86 15862366271 (WhatsApp/WeChat)

Five Common Lubrication Mistakes That Shorten Bearing Life

MS Bearing WareHouse

Most bearing failures are lubrication-related. The mistakes are almost always predictable and avoidable. This guide covers the five most common lubrication errors and how to correct them.

See also grease vs oil.

Mistake 1: Over-Greasing

More grease seems safer, but churning grease generates heat. A bearing packed to 100 percent free space can run 10 to 20 C hotter than one packed to 30 percent. Over-greasing is the #1 cause of hot motor bearings.

Fix: Pack 30 percent of free space for high-speed bearings, 60 to 80 percent for low-speed. Remove the drain plug after relubrication and let excess escape.

Mistake 2: Mixing Grease Brands

Different thickeners (lithium, polyurea, calcium complex) can react chemically. The grease can soften, liquefy, or harden. Mixed grease fails in weeks.

Fix: Stick to one grease brand. If you must switch, flush the bearing completely and repack. Never top up with a different grease.

Mistake 3: Wrong Base Oil Viscosity

Grease that looks right at room temperature can be too thin at operating temperature. A VG 68 grease in a 90 C bearing behaves like VG 22, and the oil film collapses.

Fix: Calculate the operating viscosity. If it is below the minimum, step up to a higher base oil grade or a synthetic grease with better temperature stability.

Mistake 4: Ignoring Relubrication Intervals

"Sealed bearings never need grease" is true for normal duty. But in hot, dirty, or vibrating environments, the grease still ages. It turns hard, separates oil, and leaves the bearing dry.

Fix: Follow the relubrication interval for your operating temperature. Check the grease color and consistency at every maintenance visit.

Mistake 5: Using Sealed Bearings in Hot or Washdown Duty

A 2RS bearing is greased for life, but that life is calculated at normal temperature. In a 100 C fan or a weekly washdown, the grease and seals degrade fast. The bearing fails before its calculated life.

Fix: For high temperature, use an open bearing with external seals and a high-temperature grease. For washdown, use FKM seals or stainless steel bearings with food-grade grease.

Frequently Asked Questions

Can I add oil to a grease-packed bearing?

No. Adding oil to grease changes the soap structure and destroys the thickener. If you need oil lubrication, convert to an oil bath or circulation system.

How do I know if the grease has gone bad?

Smear a small sample between your fingers. Fresh grease is smooth and uniform. Bad grease is crumbly, separated, discolored, or gritty. Replace it immediately.

Is red grease always better?

No. Color is just dye. Read the label: thickener type, base oil viscosity, NLGI grade, temperature range. Color tells you nothing about performance.

Related Reading

Need Lubrication Training or Grease?

MS Bearing supplies pre-greased bearings and can recommend the correct grease for your operating conditions. Send us your temperature, speed and environment, and we will specify the lubricant and interval.