sales@cnprv.com

+86 15862366271 (WhatsApp/WeChat)

5 Signs Your Bearing Grease Has Failed (and What to Do)

MS Bearing WareHouse

Most bearing failures begin long before the bearing itself is damaged—they begin with the grease. Grease that has hardened, oxidized or washed out cannot separate the rolling elements. Catching the signs early saves the bearing and the machine.

1. Hardened or Crumbly Grease

Healthy grease is smooth and buttery. When it oxidizes, it turns hard, crumbly and dark brown or black around the seals. Hard grease cannot reach the contact zone, and metal-to-metal wear begins. If you see hard grease when repacking, flush the housing and replace the bearing if wear is visible.

2. Water Milky or Rancid Smell

Water in grease turns it milky, grey or rust-colored. It also washes away the protective oil film and causes rust on raceways. Water entry means a seal has failed. Replace the seal and the grease, and inspect raceways for rust etching.

3. Overheating and Dark Discoloration

A bearing running hotter than normal (see overheating) and grease that comes out black or burnt-smelling means the grease has broken down. Check relubrication interval, fill quantity and whether the wrong grease was used.

4. Grease Leaking Around the Shaft

Fresh grease weeping slowly past a seal is normal. Continuous leakage past a worn lip means the seal is shot and contaminants are entering. Replace the seal. Leaking grease can also be a sign of over-fill—see grease quantity.

5. Vibration and Noise Rise

A bearing that suddenly gets noisier or vibrates more may be starved of lubricant. The rolling elements skid instead of roll. Stop the machine, inspect grease condition and repack before raceway damage starts. See vibration monitoring.

What to Do

When grease has failed, do not simply pump in new grease on top. Clean the housing, inspect raceways for brinelling or etching, replace seals and repack with the correct grease. If raceways are already damaged, new grease will not save the bearing.

FAQ

Q: How often should I inspect grease?
A: For critical machines, sample grease during planned outages. For general duty, rely on temperature and vibration trends.

Q: Can I mix new grease with old?
A: Only if the thickener is compatible. When in doubt, flush completely.

Related Reading

Diagnosing a bearing that runs hot or noisy? Send us photos of the grease—we will help identify the failure mode.